Managing Dx Content Router; Publisher Console; Gathering Snmp Statistics - Dell DX6000 Installation And Configuration Manual

Dx cluster services node installation and configuration guide
Hide thumbs Also See for DX6000:
Table of Contents

Advertisement

A single Replicator can subscribe to multiple Publisher channels by using the 'Add Channel' button:
A channel subscription consists of the following components:
Parameter
Channel Subscriptions: Channel Name
Channel Subscriptions: Publisher Server Host
Channel Subscriptions: Publisher Server Port
The CSN Console should be used for all configuration updates, but, for reference purposes, all
Replicator configuration parameters are stored in the configuration file: /etc/caringo/contentrouter/
replicator.cfg. This file is automatically generated and should never be manually edited unless under
direction of your support personnel.

5.2. Managing DX Content Router

5.2.1. Publisher Console

The Publisher console publishes current status for the Publisher and all the Replicator Subscribers it
is currently communicating with. From a browser on the external network, the Publisher console can
be accessed from http://CSNExternalIP:8090/publisher/. Alternatively the Publisher console can be
accessed by clicking the View Publisher Console button on the Publisher Configuration page under
the Content Router tab of the CSN Console. The Publisher console will not be reachable if Publisher
is not running on the CSN. The default password for the console when issuing a Republish or
Republish All is 'dell'. Please reference the DX Content Router Setup and Configuration Guide for a
complete overview of the data available from the Publisher console.

5.2.2. Gathering SNMP Statistics

Similar to DX Storage, the CSN populates SNMP MIBs that report status and operational data for
both Publisher and Replicator independently based on DX Content Router's HTTP status reporting.
Copyright © 2010 Caringo, Inc.
All rights reserved
Description
The name of the channel the Replicator
will subscribe to (from the remote Publisher
rules.xml file)
The IP address or hostname of the Publisher
to which the Replicator will subscribe. If the
Publisher is remote, this must be the external
cluster IP address for the CSN on which the
Publisher is installed.
The port on which the Publisher publishes
UUIDs
30
Version 2.0
December 2010

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx6004sDx6012sDx storage cluster services node 2.0

Table of Contents