Replicator - Dell DX6000 Installation And Configuration Manual

Parameter
IP Address
Port
Log Level
Console Password
Rules File Path
Note that a default rules.xml file is created with a 'ReplicateAll' rule. Administrators will likely wish to
customize the published channels to filter a more granular set of objects. Please reference the DX
Content Router Setup and Configuration Guide for full details on creating filter rules.
The CSN Console should be used for all configuration updates, but, for reference purposes, all
Publisher configuration parameters are stored in the configuration file: /etc/caringo/contentrouter/
publisher.cfg. This file is automatically generated and should never be manually edited unless under
direction of your support personnel.

5.1.2. Replicator

Replicator retrieves one or more lists of UUIDs from remote cluster via the Publisher service and
sends replication requests to local DX Storage nodes. To configure Replicator on the CSN, navigate
to the DX Content Router tab of the CSN Console and click on the 'Replicator' link:
Copyright © 2010 Caringo, Inc.
All rights reserved
Description
external network; Disable proxy communication
if subscribers will access content from the
internal network or via custom firewall rules
The read-only IP address on which the
Publisher will communicate with the local
cluster on the internal network. Remote
subscribers wishing to communicate with the
Publisher should use the external cluster IP
address for the CSN but privileged applications
on the internal network may use this IP
address.
The read-only port Publisher uses to publish
UUID data. This port must be included when
configuring remote subscribers.
The level of logging verbosity
The password used for authentication on the
Publisher console when issuing a Republish or
Republish All. Default value is 'dell'.
The name and location of the XML rules file the
Publisher uses to filter UUIDs
28
Version 2.0
December 2010