Related Manuals for Stoll CMS 502
Summarization of Contents
Documentation DVD
Accessing the Documentation DVD
Instructions for accessing digital documents on the provided DVD.
Safety Instructions
Intended Use
Defines the machine's purpose and compliance with country-specific regulations.
Organizational and Personnel Safety
Guidelines for personnel, organizational responsibilities, and safety regulations.
Symbols and Warning Explanations
Explains pictograms, warning types, and signal words used for safety.
Safety Precautions by Machine Lifecycle Phase
Safety measures for transport, installation, operation, maintenance, and dismantling.
Electrical Data and Specifications
Machine Dimensions and Weights
Provides physical measurements and weight specifications for various models.
Electrical Specifications
Details supply voltage, phase, current, and power consumption.
Gauge Ranges
Lists available gauge ranges and corresponding needle counts.
Operating and Storage Conditions
Specifies ambient conditions for operation and long-term storage.
Main Components of the Knitting Machine
Front Side Components
Identifies key components visible from the front of the machine.
Inner Machine Views
Highlights major parts visible from the inner workings of the machine.
Right Lateral View Components
Identifies components on the right-hand side of the machine.
Rear Side Components
Identifies key components located on the rear of the machine.
Security Relevant Operating Elements
Main Switch and Emergency Stop
Details the operation of the main power switch and its emergency stop function.
Engaging Rod Operation
Explains the function and positions of the engaging rod for carriage movement.
Optical and Acoustic Signal Elements
Signal Light Status
Describes the meaning of different signal light colors and patterns.
Touch Screen Interface
Explains pictograms and messages shown on the touch screen for errors.
Horn Alarm Functionality
Details situations that trigger the audible alarm signal.
Yarn Control Device Lamps
Explains the function of LEDs on the yarn control device.
Assembly and Setting Up
Preparation, Transport, and Unpacking
Steps for preparing the installation site, tools, transport, and unpacking.
Machine Assembly Procedures
Instructions for putting up, connecting power, and installing major components.
Configuration and Calibration
Steps for setting date/time, aligning the machine, and performing reference runs.
Safety Checks and Emergency Procedures
Procedures for checking protective devices and bringing the carriage to an immediate standstill.
Need help?
Do you have a question about the CMS 502 and is the answer not in the manual?
Questions and answers