Dell DX6000 Deployment Manual page 47

Dell DX Object Storage – File Gateway Deployment Guide
directory. With file logging, default log rotation will be configured to keep up to 8 log files,
rotating weekly or at a max file size of 512 MB.
Syslog facility – If the syslog option was selected, enter the facility to log to. The default value
is local4. Configuration of a remote syslog host must be done in the syslogd configuration file.
Log level – Enter the minimum level of log messages to record. The default value is info. Each log
level includes the following:
info – errors, warnings and information messages like system start up and stop
•
verbose – errors, warnings, and info messages plus high-level operational functions
•
debug – errors, warnings, info and verbose messages plus lower level operational functions
•
trace – all possible log messages
•
CNS Host – IP address or hostname of the name space server that will store the file system
metadata for the mount you are configuring. The default is localhost (127.0.0.1), which will
configure the share to use a name space on the local server. To use a name space configured on a
remote server, enter the external IP address for the previously created name space.
NOTE: If configuring a multi-server environment where more than one CFS server is sharing a
single CNS instance, you must enter the same CNS host information that was entered in the cns-
admin utility for each share. A unique serial number will be generated for every created CFS share
for internal use when requesting exclusive file locks across all servers in the name space. This
serial number is stored with the CFS configuration files so they must not be copied from one
server to another to ensure the CFS share serial number is not duplicated.
CFS Time Horizon: (Default=0d means not Timecapes. Select OK for the default (0d)
Use Zeroconf for CFS configuration? – Specify whether Zeroconf should be used to discover the list
of nodes in the Dell DX Object Storage cluster. The CFS server must be in the same subnet as the
Dell DX Object Storage cluster to use Zeroconf.
If No is selected, provide the following information:
Dell DX Object Storage cluster primary address – IP address or hostname of a Dell DX

Storage node in the target cluster. The target cluster must be the same as the one
configured for the Content Name Space (CNS).
Dell DX Object Storage primary SCSP port – Port the Dell DX Object Storage node uses for

SCSP communications. The default is '80'.
Dell DX Object Storage cluster secondary address – IP address or hostname of a second

Dell DX Object Storage node in the target cluster for redundancy. The target cluster must
be the same as the one configured for the Content Name Space (CNS).
 Dell DX Object Storage secondary SCSP port – Port the secondary Dell DX Object Storage
node uses for SCSP communications. The default is '80'.
If Yes is selected, provide the following information:

CASstor cluster name – Name of the Dell DX Object Storage cluster. This must match the
value of the Dell DX Object Storage "cluster" parameter in the node.cfg file and be the
same as the one configured for the Content Name Space (CNS). The cluster name is also
displayed on the Cluster Services Node management GUI.
Page 45