Page 1: Table Of Contents
ELECTRIC BICYCLE OWNER’S MANUAL For Owners of EG Zurich 500MX and EG Geneva 500MX Electric Bicycle Table of Contents Descriptions: Page Installation Instructions How to install the bicycle out of the box Operation Instructions How to operate the Electric Bicycle...
Page 2: Installation Instructions
INSTALLATION INSTRUCTIONS How to install the bicycle out of the box 1. Unpack the bicycle from the box and cut all the ties that held the bicycle together during shipping. 2. Remove the Stem protective cover by loosening the Allen Keyed nut on stem and then Install the handle bar by inserting the handlebar stem into the head tube.
Page 3: Operation Instructions
OPERATION INSTRUCTIONS How to operate the Electric Bicycle To turn “ON” the flow of electricity to the bike’s electrical system, Press the Power Switch on Handlebar controller. To turn “OFF” the flow of electricity to the bike, Press and hold the Power button for 2 seconds on the Handlebar controller.
Page 4 charge” with the battery in use among the pedal assist modes. This mode will provide you with the maximum speed and power on pedal assist with speeds up to over 28mph. 2c. Pedal Assist Mode (Level 0)  Turn on the electrical system to the electric bike by Press the “Power” button on the handlebar controller.
Page 5: How To Operate The Front And Rear Led
4. Walk Assist Mode –  Turn on the electrical system to the electric bike by Press the “Power” button on the handlebar controller. And then Press and Hold the “UP” button on the handlebar controller continuously to have the bike assist you on the road or up a hill. ...
Page 6: Care Instructions
! NOTE: You can remove the keys from the bike after locking the battery onto the bike frame. You do not need to leave the key inserted in the bike to operate the electrical system of this bicycle. ! WARNING: Please keep your keys to your electric bicycle in a safe place. Each set of keys are unique to your particular electric bicycle and unfortunately we do not keep a copy of your keys on file.
Page 7: Charger
logging. The battery may be transported in a vehicle such as an automobile, train, ship, airplane and etc. Please check your local rules and regulations regarding such transportation. Battery Storage conditions: Room temperature -20～35℃, Battery Storage relative humidity: 5～65％RH Charger ...
Page 8: Charging The Battery
Bicycle owner’s manual. Serial Numbers to your EG Electric Bike 1. There are 3 serial numbers that are of importance on your EG Electric Bike. They are the Frame serial number, the Motor serial number and the Battery pack serial number.
Page 9: How To Detach The Rear Wheel Of The Electric Bike
2. The Bike Frame Serial number to your EG Electric Bike is located at the front of the bike on the frame nearest to where the front fork enters the frame, just above the fork. 3. The Motor serial number is located on the under side of the motor.

EG Geneva 500MX Owner's Manual

Quick Links

Table of Contents

Need help?

Questions and answers

Related Manuals for EG Geneva 500MX

Summary of Contents for EG Geneva 500MX

Table of Contents