Table of Contents
Advertisement
3. Select Ultra160 FMS 1.11 from the options. Press Enter.
4. Select Microsoft Windows NT 4.0. Press Enter.
5. When prompted, insert the floppy disk that you labeled "Ultra160 FMS
v1.11 for Microsoft Windows NT 4.0 Setup Disk."
6. Press Enter and follow the succeeding screen instructions.
B. New System Installation
This section describes installing and using the Adaptec Family Manager Set
(FMS) Driver for Windows NT. If you are performing a first time Windows
NT installation, see the "Completing a Fresh Windows NT v4.0 Installation
from Floppy Disk" or the "Completing a Fresh Windows NT v4.0 Installation
from CD-ROM" sections below. If Windows NT is already installed on your
system, see the "Updating the Adaptec driver under Windows NT v4.0" section
below. For more complete instructions, the Ultra160 FMS User's Guide is
available in this CD.
5-4
Chapter 5: Driver Installation
Advertisement
Table of Contents
