Related Manuals for Ultima HT18/36
Summarization of Contents
INTRODUCTION & RECOMMENDATIONS
Gate Installation Prerequisites
Checks to ensure the gate is suitable for automation and safe operation.
Electrical Safety Precautions
Warnings and requirements for safe electrical connections and installations.
ULTIMA TECHNICAL SPECIFICATIONS
Gate Specifications
Details on maximum gate mass, pull, running forces, and size.
Motor Specifications
Information on supply voltage, current draw, standby power, and receiver details.
TRITEK CONTROLLER SPECIFICATIONS
Controller System Details
Specifications for processor, memory, display, and user interface.
Inputs and Outputs
Lists available inputs and outputs for various functions and devices.
MENU NAVIGATION OVERVIEW
Joystick Menu Navigation
Explanation of how to navigate the controller's menu using the joystick.
Quick Nav Screen Functionality
Overview of shortcuts to common functions via the Quick NAV screen.
COMMISSIONING THE OPERATOR FOR THE FIRST TIME
Step 1: Programming Gate Limits
Process for setting the open and closed positions using the Setup Wizard.
Step 2: Setting Collision Sensing
Configuration of safety features for detecting obstructions.
Step 3: Programming a Remote
Steps to add and configure remote control buttons for gate operation.
CONTROL BOARD FUNCTIONS
BEAM SETTINGS
Configuration options for safety beams, including auto-close and reverse functions.
REMOTE SETTINGS
Add Remotes (No groups)
Procedure for programming new remotes to the controller without using groups.
Second Method: Duplicate Group Functions
Copying existing remote functions to a new remote.
Add Remotes (With groups)
Adding remotes to specific groups for organized access control.
Edit Group
Managing functions and access permissions for different user groups.
PEDESTRIAN ENTRY
Pedestrian Gap
Setting the distance for partial opening for pedestrian access.
Pre Open Delay
Delay before gate opens for pedestrian access, allowing warning signals.
SECURITY SETTINGS
Ambush Alarm
Configuring an alarm triggered by blocked safety beams in the open position.
Break In Alarm
Configuring an alarm triggered by blocked safety beams while the gate is closed.
LOCK SETTINGS
Off When Open
Function to disable magnetic locks when the gate is open to save power.
TIME MANAGER
Set Time & Date
Setting the controller's current date and time for accurate scheduling.
Set Time Period
Creating time periods for scheduled activation or deactivation of functions.
GATE SETUP
Setup Wizard
Automatic programming of gate open and closed limits.
Safety Settings
Configuration of closing and opening forces and collision sensing.
GATE RUN PROFILE
Open Ramp Up
Adjusts acceleration distance before reaching maximum opening speed.
Opening Speed
Sets the maximum speed for gate opening.
SERVICE SCHEDULE
WEEKLY Checks
Routine cleaning and checks to maintain the gate operator.
MONTHLY Checks
Monthly inspection of operator condition, parts, and forces.
TECHNICAL SPECIFICATIONS
CONTROLLER SYSTEM
Detailed specifications of the controller's hardware and software components.
SUPPLY SYSTEM
Specifications for power supply inputs, voltage, and battery charging.
Need help?
Do you have a question about the HT18/36 and is the answer not in the manual?
Questions and answers