Related Manuals for Singer SWP
Summarization of Contents
Components
Product Specifications
Lists the model, water tank capacity, steam output time, input voltage, and output power.
Set Up Your SteamWorks Pro Garment Steamer
Step 1: Pole Connector and Telescopic Pole
Instructions for loosening and securing the pole connector and telescopic pole.
Step 2: Folding Hanger and Telescopic Pole Height
Attaching the hanger and adjusting the telescopic pole height.
Step 3: Steam Hose Installation
Installing and tightening the steam hose connector.
Step 4: Hanger Arms and Steam Nozzle
Extending hanger arms and hanging the steam nozzle.
Instructions for Use
Step 1: Fill Water Tank
Remove, fill, and replace the water tank and its cap.
Step 2: Plug In and Turn On
Connect the steamer to power and switch it on.
Step 3: Heating Up
The steamer heats up in approximately 45 seconds.
Step 4: Ready for Steaming
The steamer is now ready for use.
Maintenance & Cleaning
General Maintenance Steps
Instructions for turning off, unplugging, and cooling the unit before maintenance.
Remove Mineral Build-Up
Steps to clean mineral deposits using water and vinegar solution.
Accessory Assembly & Use
Hanger Assembly and Use
Instructions for assembling and using the folding hanger.
Fabric Brush Use
Demonstrates the use of the fabric brush accessory.
Steaming Instructions
Steaming Garments
Demonstrates the correct technique for steaming garments.
Smart Auto Shut-Off Feature
Important note about the auto shut-off feature when the water tank is empty.
Troubleshooting
Common Problems and Solutions
A table listing issues like no steam, noise, or weak steam, with their causes and fixes.
WEEE Disposal Information
Guidelines on the proper disposal of electrical and electronic equipment.
Warranty
Limited Warranty Details
Information on the warranty period, coverage, exclusions, and how to obtain service.
Need help?
Do you have a question about the SWP and is the answer not in the manual?
Questions and answers