Intel 82559 Network Driver Installation; Ati Rage Xl Display Driver Installation - Asus CUR-DLS User Manual

5. Motherboard Driver Installation
II. Intel 82559 Network Driver Installation:
Since SCO UnixWare system cannot support Intel 82559 default, user can down-
load the Prob 100+ Network Driver from SCO FTP site at: ftp://ftp.sco.com/pub/
drivers/UW710/network/
Or user can find the Intel 82559 Network driver from ASUS Driver Support CD at:
\LAN\UNIX\UWx\
It is not necessary, nor recommended, to remove previous versions of this package
from the system before installing this updated version. To install this package, you
may use the scoadmin Application Installer from the desktop, or as a root login with
pkgadd command.
1. From the UnixWare 7.1.1 OS Updates CD-ROM (Disk 2): # pkgadd -d cdrom1
nd
2. Or, from a download file image or copied from support CD. Copy the driver to
a temporary directory, for example /usr/tmp/nd_711.pkg. # pkgadd -d /usr/
tmp/nd_711.pkg
NOTE: Do not use /tmp as the download directory. It could fail with a 'No
space' message during pkgadd.
The warnings: WARNING: UnixWare Update 7.x.x should be reapplied can
be safely ignored. There are no files in the Updates that patch this package.
3. After the nd package is loaded, a message indicating a system reboot is neces-
sary may appear. To reboot the system, type the following command: # init 6
III. ATI Rage XL Display Driver Installation:
Since SCO UnixWare 7 cannot support ATI Rage XL graphic default, user must
configure the graphic as standard "IBM VGA" . User can change the graphics driver
by using scoadmin instruction from command prompt.
ASUS CUR-DLS User's Manual 97