Asus CUR-DLS User Manual page 89

5. Motherboard Driver Installation
13. At the Boot Solaris screen, select the device controller attached to the device
that contains your install medium, i.e., CD-ROM or Network device.
14. Press F2_Continue. Drivers for the device controller that you selected are
displayed. Your system boots to run the install program. The install program
starts and your machine begins booting the complete Solaris operating envi-
ronment. The following messages appears some time later, and prompts the
user to insert each of the Solaris Driver ITU diskette(s) required to install into
your machine:
Installing unbundled device driver support Extracting driver list from tree...
<ITU diskette name> driver-name... Please insert the Driver Update diskette
labeled <ITU diskette name>. Press <ENTER> when ready.
15. Remove the Solaris Device Configuration Assistant Diskette. Reinsert the
SYMHISL Driver ITU diskette that you inserted earlier into the diskette drive.
16. Press Enter. Packages and/or patches that contain the new drivers are installed
from the diskette onto your machine. Messages about each installation appear
accordingly. When the following prompt appears:
Please insert the Driver Update diskette labelled <SYMHISL>. Press <EN-
TER> when ready.
17. Insert the SYMHISL ITU diskette into the floppy diskette drive. When the
prompt asking if you wish to create a new instance of the SYMHISL package
appears, respond with N for no. When the prompt asking if you wish to over-
write the existing instance of SYMHISL appears, respond with Y for yes.
18. If drivers on other Solaris Driver ITU diskettes are required, remove the Driver
ITU diskette from the diskette drive, insert the next Driver ITU diskette when
prompted to insert it, press Enter, and repeat this process until all drivers you
need are installed.
19. Press Enter. When the installation has completed, the message "Installation
complete" appears.
20. Remove the diskette from the floppy diskette drive. Reboot your machine.
When the Solaris operating environment is finished booting and running, the
new devices whose drivers you installed are available for use.
ASUS CUR-DLS User's Manual 89