Microsoft Windows Nt Device Drivers From Compaq - Compaq ProLiant 1850R Setup And Installation Manual

Please read NETWORK.RDM from the NSSD diskettes for further information.
Your ProLiant 1850R server comes with one IDE channel to which you


can attach IDE devices. For each IDE channel to which you have an
attached device, you must load the following drivers found on the NSSD
diskette according to the type of device attached:
For each IDE channel: LOAD A:\IDE\IDEATA.HAM

For an IDE fixed disk : LOAD A:\IDE\IDEHD.CDM

For an IDE CD-ROM drive: LOAD A:\IDE\IDECD.CDM

Please read STORAGE.RDM from the NSSD diskettes for further information.
If you are running NetWare 3.2 there may be additional patches required.


Additional patches are available from Novell through NetWare or their
support website at http://support.novell.com.
The most current patches for your particular operating system are


available from Novell through NetWare or their support web site
http://support.novell.com.
Microsoft Windows NT Device Drivers from
Compaq
Drivers to support Windows NT 3.51 and 4.0 on Compaq ProLiant servers are
located on the Compaq Support Software Diskette (NT SSD) for Microsoft
Windows NT or on Windows NT retail product. These drivers are also located
on the Compaq SmartStart and Support Software CD. The drivers on the SSD
may be newer versions with support for new functionality, problem fixes, and so
on. If you use Compaq SmartStart to install your operating system, these drivers
are installed automatically. Otherwise, you can use Compaq SmartStart to create
the Compaq SSD for Microsoft Windows NT from Compaq to support a manual
installation of NT drivers.
For more information on driver installation, run the README.BAT file in the
root directory of the SSD for Windows NT. This will load the WinHelp file
NTREADME.HLP.
Compaq ProLiant 1850R Setup and Installation Guide
5-13