HP 3000 - 37XE System Release Note page 6

Prerequisites
Multipathing support
A Sun Solaris system with EVA3000/5000 storage requires the installation of either Sun Solaris
MPxIO/Multipathing or VERITAS VxVM/DMP multipathing software on each host to achieve
high-availability, multipath capability. Sun Solaris MPxIO/Multipathing and VERITAS VxVM/DMP
multipathing software require at least one FCA connected to both controllers. VERITAS VxVM/DMP can
require installation of an array support library in order to recognize the arrays. For more information, see
the HP StorageWorks MPxIO for Sun Solaris application notes or the HP StorageWorks EVA3000/5000
Enterprise Virtual Array hardware configuration guide.
VCS 3.028 to VCS 4.00x migration
The Active/Active failover feature in VCS 4.00x impacts host configurations. Contact your HP service
representative to configure your system and perform the migration procedure.
Compatibility/interoperability
This release provides full support for all previous EVA controller software used in an existing SAN
configuration.
Storage system attachments
Table 3 lists the supported Solaris storage system attachments.
Table 3 Supported platforms
Platform
Sun Fire (SPARC)
Sun Enterprise
(SPARC)
x86/x64 Servers
nl
(Solaris 10 only)
SPARC 1, Enterprise
(Sun, FSC 2 ) Solaris
10 only
FSC PRIMEPOWER
(SPARC )
1
HP supports these servers the same way as Sun servers whether they are sold by Sun or FSC.
2
Fujitsu Siemens Computers
6
Model number
280R V120 V210 V215 V240
V245 V250 V440 V445 V480
V490 V880 V890, V1280
4800 4810 6800 12K 15K
E2900 E6900 E20K E25K
E220R E420R E250 E450
E3000 E3500 E4000 E4500
E5000 E5500 E6000 E6500
E10000
HP ProLiant:
nl
DL145 DL385 DL585 BL25p
BL35p BL45p BL460c BL465c
BL480c BL685c DL145 G2,
DL385 G2, DL585 G2
Sun Fire:
nl
V40z x4100 x4200 x4600,
x8400 x8420 x8440
M4000 M5000 M8000
M9000 T1000 T2000
PW250 PW450 PW650
PW850 PW900 PW1500
PW2500