Jumper Setting
10 )JP1 (BIOS Recovery Jumper)
1-2 Close: Enable BIOS recovery function
1
2-3 Close: Disabe this function (Default setting)
1
11 )CLR_CMOS1 (Clear CMOS Jumper)
You may clear the CMOS data to restore its default values by this jumper.
Default value doesn't include the "Shunter" to prevent from improper use this jumper. To
clear CMOS, temporarily short 1.2 pin.
1
1-2 Close: Clear CMOS
1
2-3 Close: Normal (Default setting)
2 8