Advertisement
Quick Links
EZSTLG8WS*1B
LZSTLG8WS*1B
Buy at
| 855-558-9600 | BottleFillingStations.com
INSTALLATION, CARE & USE MANUAL
Manual de Instalación, Cuidado y Utilización
Manuel d'installation/entretien/utilisation
EZ
& LZ™ Series Versatile Bottle Filling Stations & Coolers
™
EZ™ & LZ™ Serie versatil Botella Bombas y Enfriadores
EZ™ & LZ™ Stations versatile de Remplissage de Bouteille Série et Refroidisseurs
*Versatile Cooler Model LZSTLG8WSLK
alternate installations
*Versatile Cooler Model LZSTLG8WSLK
configuration as shippe
*Versatile cooler design allows units to be
installed either left-hand high and right-hand low
or left-low and right high.
Basin change may be required. See desired
rough-in to help determine if the basin change is
necessary.
Page 1
1000001714 (Rev. G - 06/16)
Advertisement
Related Manuals for Elkay EZSTLG8WS 1B Series
Summarization of Contents
Elkay Bottle Filling Stations & Coolers Installation, Care & Use Manual
Versatile Cooler Design and Installation Options
Details the versatile cooler design, installation flexibility, and basin change considerations.
Standard Rough-In: Left-Hand High, Low Bottle Filler
Installation Legend and Requirements
Details water supply, waste, electrical, and ventilation requirements for installation.
Alternate Rough-In: Right-Hand High, Low Bottle Filler
Alternate Installation Legend and Requirements
Details requirements for alternate right-hand installation, noting basin assembly change.
Alternate Rough-In: Right-Hand High, High Bottle Filler
Alternate High Installation Legend and Requirements
Provides installation legend for right-hand high models, including ADA cooler height reduction.
Alternate Rough-In: Left-Hand High, High Bottle Filler
Alternate High Left Installation Legend and Requirements
Details requirements for left-hand high installation, including ADA cooler height reduction.
Hanger Bracket Installation
Mounting Hanger Brackets
Instructions on how to mount hanger brackets securely to the wall using mounting holes.
Cooler Installation and Startup
Connecting Water Inlet and Installing Trap
Guides on connecting water inlet, installing the trap, and checking for leaks after assembly.
Stream Height Adjustment and Start-Up
Covers stream height adjustment and initial start-up procedures for the unit.
Service Instructions: Shroud and Component Access
Removing Lower and Upper Shrouds
Steps to remove lower and upper shrouds for access to internal components.
Servicing the Bubbler and Push Bar Switches
Instructions for servicing the bubbler and accessing/understanding switches behind the push bar.
Bottle Filler Installation Instructions
Mounting the Wall Plate and Bottle Filler Unit
Steps for installing the wall mounting plate and attaching the bottle filler unit.
Connecting Waterline, Power, and Testing
Procedures for connecting water, power, testing for leaks, and verifying dispensing.
BF11 - BF12 Control Board Programming
Verifying Software and Setting Control Board
Steps to verify software designation and set control board parameters for BF11/BF12.
Configuring IR Sensor Range and Unit Type
Adjusting IR sensor range and selecting unit type (Refrigerated/Non-Refrigerated).
Resetting Bottle Count and Filter Capacity
Procedures for resetting the bottle counter and configuring filter capacity settings.
Alternate Mounting: Moving Bottle Filler & Basin to Left
Refrigerated Cooler Side Disassembly
Steps for disassembling the shroud/basin assembly and disconnecting components on the refrigerated side.
Non-Refrigerated Cooler Side Disassembly
Steps for disassembling the shroud/basin assembly and disconnecting components on the non-refrigerated side.
Alternate Mounting: Drain Swap and Reassembly
Swapping Drain Parts and Tightening Clamps
Instructions for swapping drain components and securing hose clamps.
Reconnecting Lines and Reassembly Precautions
Guidance on reconnecting water lines/wires and precautions for reassembling the unit.
Wrapper and Trim Kit Installation
Left Hand Wrapper Installation
Steps to install the wrapper and trim piece for left-hand configurations.
Right Hand Wrapper Installation
Steps to install the wrapper and trim piece for right-hand configurations.
Strainer Cleaning and Bubbler Detail
Cleaning the Strainer
Procedure for cleaning the solenoid valve strainer by removing and rinsing the screen.
Bubbler Replacement Tightening Note
Important note on proper tightening of nuts during bubbler/pedestal replacement.
Technical Operation and Filter Information
Quick Connect Fitting Operation
Instructions on how to connect and disconnect tubing using quick connect fittings.
Watersentry Plus Filter Parts List
List of components for the Watersentry Plus filter, including part numbers.
Parts Lists and Kits
115V Parts List
Detailed list of 115V parts for the unit with part numbers.
Bottle Filler Replacement Kits
List of available replacement kits for the bottle filler component.
Need help?
Do you have a question about the EZSTLG8WS 1B Series and is the answer not in the manual?
Questions and answers