Related Manuals for IDENTEC SOLUTIONS i-Q350
Summarization of Contents
Introduction
Preparations
This installation manual must be read carefully prior to starting the installation.
Recommended Procedure
Steps for successful installation and initial checks.
Scope of this Document
Defines the user's manual scope for tag models and intended use.
Responsibility
Statement on IDENTEC SOLUTIONS' liability for document errors.
Associated Documents
Lists related data sheets for tag models.
Scope of Delivery-Visual Inspection
Instructions for checking delivery completeness and damage.
Safety Precautions
Important Safety Note
Devices are for trained employees; qualified personnel must perform installation and maintenance.
Operational Safety
Ensuring safe operation by following manual and general safety procedures.
Do not open the housing
The housing is not user-serviceable; setup is wireless.
Handling Safety
Precautions for high operating temperatures and low temperatures.
Battery Inside
Warning about battery hazards: fire, explosion, burn risk.
Electrostatic Discharge
Component sensitivity to ESD; observe protection instructions.
Condensation/Change of Temperature
Risks of condensation when moving between environments and required adjustment.
Spare Parts
Recommendation to use only authorized original spare parts.
Maintenance
General
The ILR system is maintenance-free when correctly installed.
Precautionary Maintenance
Recommended regular checks of ports, cables, and connections for system health.
Returns
Procedures for returning parts for repair or exchange, including packaging and shipping.
Technical Data
Operating Data
Details on operating frequency, transmission power, and compatibility.
Communication Data Long-Range RFID (ILR, Response Technology)
Specifications for multi-tag handling, read/write range, and data rate.
Communication Data Long-Range RFID (ILR, Beacon Technology)
Parameters for broadcast read range, operation mode, and repetition rate.
Communication Data Inductive Loop (Marker)
Data for inductive loop read range, frequency, and operation mode.
Electrical
Information on power source and battery monitoring.
Temperature Logging
Details on sample count, logging/measuring intervals, and metering range.
Data
Specifications for data retention, write cycles, memory size, and identification code.
Environmental Conditions
Operating temperature, humidity, shock, and vibration specifications.
Physical
Dimensions, enclosure material, weight, and enclosure rating.
Need help?
Do you have a question about the i-Q350 and is the answer not in the manual?
Questions and answers