Smart/2 Array Controller - Compaq ProLiant 1000 Installation And Configuration Manual

,QVWDOODWLRQ DQG &RQILJXUDWLRQ *XLGH IRU /LQX[ DQG $SDFKH :HE 6HUYHU RQ &RPSDT 3URVLJQLD DQG 3UR/LDQW 6HUYHUV
3. Use the menu to select "View or Edit Details".
4. Scroll down to where the APIC settings are located and modify the default setting to be in
"FULL TABLE" mode.
This configuration will make the server Intel-SMP compliant, and any such Intel-SMP compliant
kernel will now recognize and boot this machine as SMP (provided, of course, that two or more
processors and their respective processor power modules are present).

SMART/2 Array Controller

The SMART/2 array controller device driver discussed in this guide is available at
www.insync.net/~frantzc/cpqarray.html
to "1.0" status. Instructions for how to install and configure the device driver are included in
Appendix A. Several different array controllers have been tested for compatibility with the driver,
including the following:
x
Compaq Smart-2/P Array Controller
x
Compaq Smart-2/E Array Controller (EISA)
x
Compaq Smart-2DH Array Controller
x
Compaq Smart-2SL Array Controller
x
Compaq Smart Array 221 Controller
x
Compaq Smart Array 3200 Controller
Note: Array controllers are add-on options for the ProLiant servers. Only the PCI-based
SMART/2 array controllers were tested with the above-mentioned device driver in preparation for
this document. However, according to the documentation available with the device drivers, EISA-
based Smart Array controllers will also work. Other Compaq or third party array controllers will
not work with this driver.
ECG513/0399
. The device driver has recently been upgraded from beta
46