Table of Contents
Advertisement
To install a 600 W dual or redundant power supply:
1.
Insert the power supply cables
and plugs to the power supply
cage.
Be careful with the power supply cables when inserting the power supply
module into the cage. Due to space constraints, the cables may get
entangled with the installed components or other cables, causing the
cables to break!
2.
Use a power supply module
handle to push the power
supply until it fits in place.
3.
Secure the power supply to
the chassis with two screws
on the metal brackets on each
side.
2 - 5 8
2 - 5 8
2 - 5 8
2 - 5 8
2 - 5 8
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
Advertisement
Table of Contents
