Asus AP1710-E1 Manual page 46

I n I n I n I n I nstalling a Serial ATA HDD to the first hard disk drive cage stalling a Serial ATA HDD to the first hard disk drive cage stalling a Serial ATA HDD to the first hard disk drive cage
stalling a Serial ATA HDD to the first hard disk drive cage stalling a Serial ATA HDD to the first hard disk drive cage
To install a Serial ATA hard disk drive to the first hard disk drive cage:
1. Follow instructions 1 to 6 of the previous section.
2. Connect the 15-pin SATA power
plug to the power connector at
the back of the drive.
3. Connect the other end of the
SATA power cable to a 4-pin
plug (female) from the power
supply unit.
4. Connect one end of the supplied
7-pin SATA cable to the SATA
connector at the back of the
drive, then connect the other
end to a SATA connector on the
motherboard. Refer to the
motherboard user guide for the
location of the SATA
connectors.
2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 2 - 2 2 C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p