Asus AP140R User Manual page 43

Problem
The system continuously beeps
after it was turned on
The message "Non-system disk
or disk error" appears
Network connection not
available
AP140R Server User's Manual
Action
1. Check the memory modules
and make sure you installed
the DIMMs the system
supports.
2. Make sure that the DIMMs are
properly installed on the
sockets.
A primary logical partition must
be created and set active to
boot from it.
1. Make sure the network cable is
connector the RJ-45 port on
the rear panel.
2. Make sure that you have
installed the network drivers
from the motherboard support
CD.
43