Related Manuals for Bison NB120-240
Summarization of Contents
Lists of Inspection
Pre-Delivery Inspection Made by Bison Dealership
Checklist for pre-delivery inspection of the rear blade by the dealership.
Delivery by Bison Dealership
Information to be transmitted to the customer at delivery.
Owner Registration
Section for customer registration details.
Post-Sales Inspection
Items to be checked during the first hours of operation.
Morning Operation Inspection
Daily checks and lubrication points.
Seasonal Inspection
Periodic checks for wear, lubrication, and operation.
Safety Rules
Distinguish Safety Messages
Explanation of danger, warning, and caution symbols.
Observe the Safety Messages
Importance of reading and following safety instructions.
Operation
Mounting the Rear Blade on the Tractor Important
Guidelines for mounting the rear blade on different tractor types.
Category II Quick Hitch
Steps for attaching the rear blade using a Category II quick hitch.
Angle Adjustment
Procedures for adjusting the blade's angle mechanically or hydraulically.
Moldboard Reversion
Steps to reverse the moldboard's cutting edge.
Tilt Adjustment
How to adjust the rear blade's tilt angle.
Offset Adjustment
Procedures for adjusting the blade's offset position.
Operation Tips
Key operational notices and cautions for safe use.
Owners Service
Equipment Blade
Instructions for reversing or replacing the cutting edge.
Lubrication
Weekly lubrication points for the rear blade.
Screws
Guidelines for checking and tightening screws.
Assembly
Main Assembly
Overview of the main assembly process and required tools.
Join the Moldboard to the Turntable and Kingpin
Steps to connect the moldboard to the turntable and kingpin.
Join the Turntable to the Moldboard
Detailed steps for joining the turntable and moldboard.
Hitch Frame Installation
Instructions for installing the hitch frame.
Stand Installation
How to install and secure the stand.
Installing Frame Hitch Bolts
Steps for installing frame hitch bolts.
Angle Pin Installation
How to install the angle pin.
Attach the Hydraulic Angle Kit to the Rear Blade
Instructions for attaching the hydraulic angle kit.
Angle Cylinder Hose Kit Assembly
Steps for assembling the angle cylinder hose kit.
Offset Mechanical Linkage Installation
Instructions for installing the offset mechanical linkage.
Join the Offset Hydraulic Cylinder to the Rear Blade
Steps to connect the offset hydraulic cylinder.
Offset Cylinder Hose Assembly
How to assemble the offset cylinder hose.
Tilt Pin Installation
How to install the tilt pin.
Join the Tilt Cylinder Kit to the Rear Blade
Steps to connect the tilt cylinder kit.
Tilt Cylinder Kit Hose Assembly
How to assemble the tilt cylinder hose kit.
Delivery Checklist
Check List Before Delivery
Dealer's responsibility to inspect equipment after assembly.
Check List for Delivery
Dealer's responsibility to inform and instruct the customer.
Torque Screw Specification
Tightening Settings of Non-Metric Bolts (In.)
Torque specifications for non-metric bolts.
Torque Screw Specifications
Tightening Settings of Metric Bolts
Torque specifications for metric bolts.
Theft Prevention
Record Product Identification Number (P.I.N.)
Instructions for recording the product identification number.
Need help?
Do you have a question about the NB120-240 and is the answer not in the manual?
Questions and answers