Related Manuals for Bison NB80-240
Summarization of Contents
Introduction
To Our Customers
Manufacturer's greeting and introduction to the product.
Lists of Inspection
Pre-Delivery Inspection
Dealer inspection checklist for pre-delivery.
Delivery by Bison Dealership
Dealer guidance for customer delivery and explanation.
Owner Registration
Fields for customer to register ownership of the equipment.
Post-Sales Inspection
Checks to be performed after the first few hours of operation.
Morning Operation Inspection
Daily pre-operation checks and lubrication points.
Seasonal Inspection
Inspection for wear, lubrication, and operation during different seasons.
Specifications
General Uses
Applications and tasks the rear blade is designed for.
Advantages
Highlights the key features and benefits of the rear blade.
Rear Blade Components
Diagram identifying the main components of the rear blade.
Safety Rules
Safety Rules Overview
General safety alert symbol meaning and message types.
Distinguish Safety Messages
Explains the meaning of DANGER, WARNING, and CAUTION labels.
Observe Safety Messages
Emphasizes operator's responsibility for reading and following safety.
Passengers Not Allowed
Prohibits passengers on the machine for safety reasons.
Handle Fuel Safely
Precautions for safe fuel handling and fire prevention.
Emergency Preparedness
Recommendations for emergency preparedness, e.g., fire extinguisher.
Appropriate Clothing
Guidance on PPE and clothing.
Driving on Public Roads
Safety precautions when transporting the blade on public roads.
Avoid Heating Near Fluid Lines
Warning against heating near pressurized fluid lines due to fire risk.
Safe Accessories Storage
Guidelines for safely storing accessories to prevent accidents.
Protection Against Noise
Recommendations for hearing protection.
Practice Safe Maintenance
Safety procedures to follow during maintenance activities.
Use Safety Lights and Accessories
Importance of safety lights and accessories for visibility.
Remove Paint Before Welding
Precautions when removing paint before welding or heating.
Check Hoses for Damage
Instructions for checking and replacing hydraulic hoses.
Tow Loads Safety
Safety considerations for towing loads and recommended speeds.
Safety in the Rear Blade
Specific safety instructions for operating the rear blade.
Training
Importance of proper training for safe operation.
Preparation
Steps and checks to perform before operating the equipment.
Operation Safety
General safety guidelines for operating the equipment.
Safety Decals
Safety Decals Overview
Information on safety decals and their importance.
Important Decal Handling
Guidance on reading, cleaning, and replacing safety decals.
Reflective Decals
Description of reflective decals used for visibility.
Decal Cleaning Advice
Advice on how to clean safety labels.
Operation
Operation Notices
Important notices regarding safe operation and personnel awareness.
Mounting the Rear Blade
Instructions for mounting the rear blade onto the tractor.
Category II Quick Hitch
Procedure for attaching the rear blade using a Category II quick hitch.
Adjustment Cautions
Precautions to take before making manual adjustments.
Angle Adjustment
Instructions for adjusting the blade's angle.
Moldboard Reversion
Procedure for reversing the moldboard's cutting edge.
Tilt Adjustment
Instructions for adjusting the blade's tilt.
Offset Adjustment
Instructions for adjusting the blade's offset.
Operation Tips
Tips for efficient and safe operation.
Pre-Operation Checklist
Operator responsibility checklist before operation.
Operation Notices
Notices regarding hydraulic fluid and general safety.
Operation Cautions
Cautions regarding clothing and hydraulics.
Owners Service
Equipment Blade Service
Reversing cutting edge and blade replacement.
Lubrication
Weekly lubrication points and procedures.
Screw Maintenance
Checking and tightening screws.
Service Notices
Notices before performing service or maintenance.
Service Cautions
Cautions regarding personal safety during service.
Distributor Setup
Instructions for distributor setup and initial assembly.
Assembly
Main Assembly
General instructions and required tools.
Blade Falling Danger
Warning about blade falling during assembly.
Contusions Danger
Warning about contusion danger.
Remove Parts From Packaging
Instructions for unpacking.
Join Moldboard to Turntable
Procedure for joining moldboard to turntable and kingpin.
Join Turntable to Moldboard
Steps to join turntable to moldboard.
Hitch Frame Installation
Instructions for installing hitch frame.
Stand Installation
Procedure for attaching and securing the stand.
Installing Frame Hitch Bolts
Steps for installing frame hitch bolts.
Angle Pin Installation
Instructions for installing the angle pin.
Attach Hydraulic Angle Kit
Procedure for attaching hydraulic angle kit.
Angle Cylinder Hose Kit
Assembly of the angle cylinder hose kit.
Offset Mechanical Linkage
Installation of offset mechanical linkage.
Join Offset Hydraulic Cylinder
Procedure for joining offset hydraulic cylinder.
Offset Cylinder Hose Assembly
Assembly of offset cylinder hose kit.
Tilt Pin Installation
Instructions for installing tilt pin.
Join Tilt Cylinder Kit
Procedure for joining tilt cylinder kit.
Tilt Cylinder Hose Assembly
Assembly of tilt cylinder hose kit.
Delivery Checklist
Check List Before Delivery
Dealer's responsibility for pre-delivery inspection and checks.
Check List for Delivery
Dealer's responsibility to inform customer about adjustments and maintenance.
Theft Prevention
Record Product Identification Number (P.I.N.)
Instructions for recording the Product Identification Number (PIN).
Warranty
General Provisions
General terms and conditions of the product warranty.
What is Warranted
Details of parts covered by the warranty.
What is Not Warranted
Specific exclusions from the warranty.
Need help?
Do you have a question about the NB80-240 and is the answer not in the manual?
Questions and answers