The Allegiant Main Control Menu; Programming And Controlling Allegiant Functions - Bosch KBD-DIGITAL User Manual

8 en | Controlling Allegiant Series Video Switchers
2.1

The Allegiant Main Control Menu

To access the Allegiant Main Control menu:
1.
2.
3.
4.
2.2

Programming and Controlling Allegiant Functions

The Allegiant Main Control menu, displayed on the softkey display, uses the softkey buttons to
execute commands or to gain access to other submenus for additional programming/
configuration. Detailed command descriptions follow. Refer to the Allegiant Switcher
Instruction Book for additional information.
F.01U.127.291 | 1.93 | 2009.03
Press PROD to put the keyboard in Product Selection Mode. The keyboard displays the
the Product Selection menu in the softkey display.
Press the Allegiant softkey button. The status display shows the Allegiant mode.
To select a camera, enter a valid 1 to 4 digit camera number using the numeric keypad
and press ENTER.
If the Allegiant is configured to operate in "6-digit Camera ID" mode, up to 6 digits can be
entered. If the new camera is at the same "site" as the current camera, simply enter 1 to
4 camera number digits.
If the desired camera is at a different "site", 5 or 6 digits must be entered. The first and
second digits are the site number and the remaining 4 digits, including any leading zeros
are the camera number at that site.
While in Allegiant mode, keyboard operators can use a convenient "Go Back" feature. To
go back to the previously selected camera, press and hold the CLR key for more than 1
second.
User
Exit
Log Off
Device Command
Lockout Script
Program Camera
Sequence Control
Alarm User
Control Functions
Load ADIM
Sequence Controls
Hold Start
Sequence Sequence
<Previous
<Sequence Sequence>
<Step Step>
Figure 2.3 Allegiant Main Control Menu
User Manual
IntuiKey Keyboard
Bosch Security System, Inc.