Setting The Protocol - Samsung SRD-830D User Manual

8 channel/ 16 channel dvr
Hide thumbs Also See for SRD-830D:
Table of Contents

Advertisement

using the DVR
• IP, Gateway, Subnet Mask, and DNS
- For <Static IP> : You can directly input IP address,
Gateway, Subnet Mask and DNS.
- For <Dynamic IP> : IP address, Gateway, and Subnet
Mask are set automatically.
- For <ADSL> : IP address, Gateway, and Subnet Mask
are set automatically.
• User ID, Password : In case you selected ADSL, provide the
"User ID" and its "Password".
M
DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.
6. When the connection setup is done, press <OK>.

Setting the Protocol

1. Use the up/down buttons () in <Network> window to
move to <Connection Mode>, and press [ENTER]
button.
2. Select <Protocol>.
3. Use direction buttons (◄ ►) to move to a desired
item, and set the value.
• Protocol Type : Select the protocol type between TCP and
UDP.
If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/
Multicast are activated.
If setting the connection mode to ADSL, you cannot select UDP for the protocol type.
• Port (TCP) : Initially, <554~558> is set. It increases / decreases by 5.
- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet
environments.
• Port (UDP) : Initially, <8000~8160> is set. It increases / decreases by 160.
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area
network (LAN) environments.
• Unicast/Multicast : Select one between Unicast and Multicast.
If selected Multicast, Multicast IP and TTL are activated.
- Unicast : Transfers data (UDP, TCP) individually to each connecting client.
- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the
network.
• Multicast IP : User can directly input.
• TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.
• Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.
4. When the protocol setup is done, press <OK>.
62_ using the DVR
Connection Mode
Connection
Protocol
 Connection Mode
ADSL
 Bandwidth
600kbps
 IP
192.168. 1.200
 Gateway
192.168. 1. 1
 Subnet Mask
255.255.255. 0
 DNS
Manual
168.126. 63. 1
 User ID
ID
 Password
************
OK
Cancel
Connection Mode
Protocol
Connection
 Protocol Type
TCP
 Port(TCP)
554
~
558
 Port(UDP)
8000 ~ 8160
 Unicast/Multicast
Unicast
 Multicast IP
224.126. 63. 1
 TTL
5
 Webviewer Port
80
OK
Cancel

Advertisement

Table of Contents
loading

Table of Contents