Connecting External Sata Hdd; Connecting Pos Device; Connecting The Alarm Input/Output - Samsung SRD-830D User Manual

CONNECTING EXTERNAL SATA HDD

M 
The external SATA connection port is not available in SRD-830/830D/830DC/1610/1610D/1610DC/1630/1630D/
1630DC.
1. Two external SATA ports are provided on the rear panel by factory default.
2. If connected to the system, the external SATA HDD can be recognized and configured in "Menu > Device >
Storage Device".
3. The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the
system is in use.

J
Only one SATA HDD can be connected to an external SATA port.

Use a cable shorter than 1 m for the external SATA HDD connections.

CONNECTING POS DEVICE

1. You can connect a POS device to the RS-232C port on the product's rear side when you connect it directly with
a RS-232C cable.
2. Connection setup for the RS-232C port is available in "Menu > Device > POS Devices", press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>. (Page 51)

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm In/Out port at the back is composed of the following.
1. Alarm In Port for SRD-830/830D/830DC/850/850D/850DC/
870/870D/870DC
2. Alarm In Port for SRD-1610/1610D/1610DC/1630/1630D/1630DC/
1650/1650D/1650DC/1670/1670D/1670DC
3. Alarm Out Port
English _21