Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Woods BATWING BW1620X
Summarization of Contents
SAFETY RULES
INSTALLATION
Safety precautions for hydraulic system installation.
TRAINING
Importance of reading manuals and safety decals for safe operation.
PREPARATION
Checks for hardware, hydraulic systems, and hoses.
TRANSPORTATION
Safety rules for transporting equipment, including ROPS and speed limits.
OPERATION
Safety precautions for operating equipment, including bystanders and shielding.
MAINTENANCE
Safety steps before servicing, adjusting, repairing, or unplugging equipment.
STORAGE
Steps for safely disconnecting and storing the cutter.
OPERATION
CONNECTING CUTTER TO TRACTOR
Instructions for connecting the cutter to the tractor PTO shaft.
Cutting Height Adjustment
Instructions for adjusting the cutting height of the cutter.
Attitude Rod Adjustment (Figure 2)
Chart and instructions for adjusting the attitude rod based on settings.
OWNER SERVICE
BLOCKING METHOD
Procedures for safely blocking the cutter before working underneath.
LUBRICATION
Maintenance procedures for lubrication, including gearboxes and drivelines.
BLADES
Procedures for blade removal, installation, and sharpening.
DEALER SERVICE
Gearbox Repair
Procedures for repairing gearboxes, including seal replacement.
Gearbox Removal
Steps to remove a gearbox from the cutter.
Gearbox Assembly
Detailed steps for assembling a gearbox.
CROSSBAR INSTALLATION
U-Joint Disassembly
Steps for disassembling a universal joint.
ASSEMBLY INSTRUCTIONS
DEALER SET-UP INSTRUCTIONS
Instructions for dealers on how to set up and deliver the cutter.
CENTER SECTION ASSEMBLY
Assembly procedures for the center section of the cutter.
Install Attitude Rods (Figure 23)
Steps for installing attitude rods to the wheel yoke.
Install Wing Assembly
Steps to install a wing assembly onto the center section.
OPTIONAL EQUIPMENT
Install Tandem Wheel Assembly - Center
Steps to install the center tandem wheel assembly.
Shredder Installation (Optional)
Crossbar Installation - Right Wing
Steps to install the crossbar and blade for the right wing shredder.
Install Stationary Blades - Center Section
Steps to install stationary blades on the center section.
DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST (DEALER'S RESPONSIBILITY)
Checklist for dealers to ensure proper setup before delivery.
Need help?
Do you have a question about the BATWING BW1620X and is the answer not in the manual?
Questions and answers