Related Manuals for Toro 31659
Summarization of Contents
Safety
General Safety Precautions
General safety precautions for operating the machine.
Safety Decals Explained
Explains safety decals and their meanings.
Setup
Media and Parts Information
Lists media and additional parts included with the machine.
Product Overview
Provides a general overview of the machine's components.
Controls Overview
Describes the main controls and their functions.
Machine Controls
Key Switch and Brake Systems
Explains key switch, parking brake, service brake, and emergency brake.
Engine and Cutting Unit Controls
Details engine speed and cutting unit drive controls.
Traction Pedals and Steering
Explains traction pedals and steering column adjustment.
Operator Seat Adjustments
Details seat adjustment for operator comfort and safety.
Fuel Gauge and Transport Latches
Explains fuel gauge and how to secure cutting units for transport.
InfoCenter Operation
Interface Navigation and Icons
Guides on navigating menus and understanding icons.
Menu Options and Settings
Details service, settings, and protected menu access.
Operation
Before Operation Safety
Pre-operation checks and safety procedures.
Daily Maintenance and Fueling
Outlines daily maintenance tasks and fueling instructions.
Traction Pedal Action Check
Procedure to check traction pedal function.
Interlock Switch Checks
Verifies the function of safety interlock switches.
During Operation Safety
General safety precautions during operation.
Rollover Protection and Slope Safety
Safety precautions related to ROPS and operating on slopes.
Operator Presence Controls
Explains operator presence control functions.
Roll Bar Adjustment
Instructions for adjusting the roll bar and related safety.
Roll Bar Lowering and Raising
Step-by-step guides for roll bar manipulation.
Engine Starting and Shutting Down
Procedures for starting and safely shutting down the engine.
Flail Cutting Unit Information
General information about flail cutting units.
Adjusting Cutting Unit Height
How to adjust the cutting unit height.
Controlling Cutting Unit Position
How to control the position of each cutting unit.
Cutting Unit Lift Features
Details limited-lift and auto-limited lift functions.
Cutting Unit Turnaround Feature
How to use the turnaround feature for cutting units.
Engaging and Disengaging Cutting Units
Procedures for engaging, disengaging, and lowering cutting units.
Weight Transfer Assistance
How to adjust weight transfer for traction.
Clearing a Blocked Rotor
Steps for safely clearing blockages from the rotor.
Operating Tips
Machine Familiarization and Mowing
Initial familiarization, mowing best practices, and cut quality.
Engine Efficiency and Transport
Engine efficiency, transport, and roller scrapers.
After Operation
Post-Operation Safety and Securing
Safety precautions and securing the machine after use.
Towing and Brake Procedures
Procedures for towing and restoring brake/pump systems.
Maintenance
Maintenance Safety
Safety guidelines for performing maintenance.
Maintenance Schedules and Checklists
Schedules and checklists for routine maintenance.
Pre-Maintenance Procedures
Platform Handling
Steps to raise and lower the operator platform.
Storage Compartment and Lift Points
Handling storage compartment and locating lift points.
Lubrication
Greasing Components
Detailed instructions for greasing bearings, bushings, and pivots.
Engine Maintenance
Engine Safety and Air Filter
Engine safety and checking/replacing the air filter.
Engine Oil and Filter Service
Procedures for checking and servicing engine oil and filter.
Fuel System Maintenance
Fuel system safety and servicing the water separator.
Fuel Filter and System Priming
Servicing fuel filter and priming the fuel system.
Drive System Maintenance
Tire Pressure and Wheel Nuts
Checking tire pressure and wheel nut torque.
Transmission Control Cable Inspection
Inspecting the transmission control cable and mechanism.
Rear Wheel Toe-In
How to check and adjust rear wheel toe-in.
Cooling System Maintenance
Cooling system safety and removing debris.
Coolant Level and Belt Service
Checking coolant level and servicing the alternator belt.
Hydraulic System Maintenance
Hydraulic System Safety and Lines
Safety precautions and checking hydraulic lines and hoses.
Hydraulic Fluid Specifications
Details specifications for recommended hydraulic fluid.
Hydraulic Fluid Level and Filter
Checking fluid level and changing hydraulic return filter.
Hydraulic Fluid Change and Strainers
Procedure for changing hydraulic fluid and cleaning strainers.
Cutting Units
Blade Safety and Replacement
Blade safety precautions and detailed replacement steps.
Blade Bolt Checks
Procedure for checking blade bolt torque.
Blade and Guard Inspection
Inspecting blades, bolts, and rear guards.
Rotor and Pivot Checks
Clearing rotors, checking front guards and cutting unit pivots.
Roller and Scraper Wire Adjustments
Adjusting rear-roller bearings and scraper wire tension.
Chassis
Seat Belt and Fastener Checks
Inspecting seat belt and checking fasteners.
Extended Maintenance and Cleaning
Extended maintenance tasks and machine washing.
Storage
Storage Safety and Preparation
Safety precautions and preparation steps for storage.
Troubleshooting
Cut Quality Issues
Resolving problems with cut grass quality.
Engine and Battery Problems
Troubleshooting engine start and battery issues.
Hydraulic and Brake System Issues
Troubleshooting hydraulic and brake system malfunctions.
Movement and Steering Problems
Troubleshooting issues with machine movement and steering.
Rotor and Cutting Unit Issues
Resolving rotor vibration, lift, and contour following problems.
Cutting Unit Startup and Rotor Direction
Troubleshooting cutting unit startup and rotor direction.
The Toro Warranty
Warranty Coverage and Service
Details warranty coverage, service, and owner responsibilities.
Warranty Exclusions and Conditions
Lists exclusions, conditions, and specific warranties.
Need help?
Do you have a question about the 31659 and is the answer not in the manual?
Questions and answers