Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input: The external sensor which is connected to
the sensor input of the camera I/O port.
Motion detection: Click Motion detection button, and
the Motion detection setting page is displayed. You
can set the motion detection function (page 52).
Note
Motion detection works only when the Video mode is
set to MPEG4 and the Cropping is set to Off.
Effective period
Set the period when the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the effective
period is displayed. (“Setting the Schedule —
Schedule setting Menu” on page 51)
Alarm buffer
Select Use alarm buffer when you forward the image/
audio of before and after the alarm detection (pre-alarm,
post-alarm).
If you do not select it, only the image of the moment of
the alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer setting
menu.
For details, see “Setting the Alarm Buffer — Alarm
buffer setting Menu” on page 51.
OK/Cancel
See “Buttons common to every setting menu” on page
26.
Recording Images in Memory — Image memory setting Menu