Related Manuals for Unimig KUPJRRW45
Summarization of Contents
Safety
Machine Operating Safety
General safety guidelines for operating the plasma cutter and observing regulations.
Electric Shock Hazards
Warnings and precautions related to electrical shock from live parts.
Fumes and Gases Hazards
Risks associated with inhaling fumes and gases during cutting.
Arc Ray Hazards
Dangers of arc rays to eyes and skin and necessary protective measures.
Fire Hazards
Risks of fire and explosion from sparks and hot materials.
Gas Cylinder Safety
Precautions when working near pressurized gas cylinders.
Electronic Magnetic Field Effects
Potential impact of magnetic fields on pacemakers and medical devices.
Noise Hazards
Risks of hearing damage from noise and required precautions.
Hot Parts Burns
Dangers of touching hot components after operation and burn prevention.
Caution
Working Environment
Guidelines for the optimal operating environment and temperature range.
Safety Tips
Essential safety recommendations for machine usage.
Thermal Overload Protection
Explanation of the thermal overload switch activation and reset.
Over-Voltage Supply
Precautions regarding input voltage supply and compensation.
Air Plasma Cutting Technology
How Plasma Cutters Work
Explanation of the plasma cutting process and its principles.
Materials Plasma Can Cut
Overview of various metals suitable for plasma cutting.
Plasma vs. Oxy-fuel Cutting
Comparison of plasma cutting with oxy-fuel cutting methods.
Plasma Cutting Limitations
Discusses limitations and where oxyfuel is preferred for thicker cuts.
Razor Cut 80
Features
Key features and technological aspects of the RAZORCUT80.
Technical Data
Specifications and technical details of the RAZORCUT80 machine.
Overview
General introduction and applications of the RAZORCUT80.
Front & Rear Panel Layout
Front Panel Layout
Identification and explanation of front panel controls and indicators.
Rear Panel Layout
Identification and explanation of rear panel connections and switches.
Operating Procedure for Plasma Cutting
Using the Stand Off Guide
Instructions for using the standoff guide for consistent cutting.
Cut Quality Factors
Factors influencing the quality of plasma cuts.
Operating Procedure & Techniques for Plasma Cutting
Amperage
How to set and use amperage for optimal cutting results.
Speed
The role of travel speed in achieving a good quality cut.
Direction
Guidance on torch movement direction for better cut quality.
Torch Tip Height and Position
Importance of torch height and angle for cut quality and bevel.
Tip Size and Condition
Selecting and maintaining the correct cutting tip for amperage.
Electrode Condition
Importance of electrode condition for plasma stream quality.
Air Pressure and Volume
Critical role of air supply pressure and volume in plasma cutting.
Air Quality
Impact of air quality on cutting performance and consumable life.
Technique Tips
General tips for improving plasma cutting technique.
Starting a Cut
Steps involved in initiating a plasma cut on the workpiece.
Piercing
Technique for piercing material with the plasma torch.
Safety Trigger Operation
Explanation of the torch's safety trigger mechanism.
SC80 Plasma Torch & Spares
Torch Spare Parts
List and identification of spare parts for the SC80 plasma torch.
Front End Consumables
Identification of front-end consumables for the SC80 torch.
Warranty / Returns / Exchanges
Making a Claim
Procedures and contact information for submitting a warranty claim.
Warranty Exclusions
MIG Welding Torches and Consumables
Specific exclusions for MIG welding torch parts and consumables.
TIG Welding Torches and Consumables
Specific exclusions for TIG welding torch parts and consumables.
Plasma Cutting Torches and Consumables
Specific exclusions for plasma cutting torch parts and consumables.
Straight Line Cutting Machines and Consumables
Exclusions for straight line cutting machines and their consumables.
HIT-8SS Welding Carriage Consumables
Exclusions for HIT-8SS welding carriage consumables.
Need help?
Do you have a question about the KUPJRRW45 and is the answer not in the manual?
Questions and answers