Related Manuals for Hunter G875
Summarization of Contents
Model Numbering System
TTS Rotors - All Models
Explains the model numbering system for TTS rotors, including body styles and riser types.
Installation and Operation
Pipe Connections – All Models
Details available options and recommendations for connecting TTS rotors to irrigation piping systems.
Solenoid and Control Features
Solenoid Connections (Electric VIH Models)
Describes connecting solenoid lead wires for Electric Valve-In-Head models.
ON-AUTO-OFF Selection (Electric VIH Models)
Explains the function and operation of the ON-AUTO-OFF selector on Electric VIH models.
Control Tubing Connections
C.O.M. Models Converted to Hydraulic Configuration
Guides on making control tubing connections for C.O.M. models converted to hydraulic configuration.
Riser Servicing and Adjustments
Upper Snap-Ring Removal
Step-by-step instructions for removing the upper snap-ring assembly from G800 and G900 series.
Riser Removal
Procedures for removing the riser assembly from all TTS rotor models.
Arc Adjustment Procedures
Preparation for Part-Circle Risers
How to prepare and identify the fixed arc stop for part-circle risers.
Adjusting Part-Circle Risers
Steps to increase or decrease the arc coverage on G35, G75, and G95 part-circle risers.
Nozzle Replacement
G70 Risers
How to view and replace nozzles on G70 risers using setscrews.
G35 & G75 Risers
Procedures for replacing nozzles on G35 and G75 risers using setscrews.
G80 Risers
Instructions for removing and replacing nozzles on G80 risers.
G90 Risers
Steps for replacing nozzles on G90 risers, noting orientation.
G95 Risers
How to view and replace nozzles on G95 risers with color-coded nozzles.
Riser Seal Replacement
G35, G70 & G75 Risers
Replacing riser seal assemblies for G35, G70, G75 models requires removing the logo cap.
G80 Risers
Procedures for replacing riser seal components (seal block, face-seal) on G80 risers.
G90 & G95 Risers
How to replace riser seal assemblies for G90 and G95 risers using a retainer cap.
Riser Filter Screen Servicing
All TTS Rotors
Instructions for removing, cleaning, and installing the riser filter screen on all TTS rotors.
Stator Adjustments
Why and When Are They Needed?
Explains the purpose of the stator and when adjustments are necessary.
G35, G70 & G75 Risers
How to adjust the stator on G35, G70, and G75 risers by aligning the plate.
G80 Risers
Procedures for adjusting the stator on G80 risers by rotating the adjustable plate.
G90 & G95 Risers
How to adjust the stator on G90 and G95 risers by aligning the adjustable stator plate.
Upper Snap-Ring Installation
G800 Series
Tips and procedures for correctly installing the upper snap-ring on G800 series rotors.
G900 Series
How to install the upper snap-ring and align the riser assembly for G900 series.
Inlet Valve Procedures
Removal and Safety Warnings
Safety warnings and overview for inlet valve removal and identification.
Disengaging Safety Interlock Feature
Detailed steps to disengage the safety interlock feature on the inlet valve.
G800 Series Removal and Installation
Procedures for removing and installing inlet valves in G800 series rotors.
G900 Series Removal and Installation
Steps for removing and installing inlet valves in G900 series rotors.
Inlet Valve Servicing
How to service inlet valves to clean and flush contamination.
Inlet Valve Installation Safety
Critical safety warnings regarding proper inlet valve installation to prevent injury.
Solenoid, Pilot Valve, and Regulator Servicing
Accessing Flange Compartment Components
How to remove the flange compartment lid and access internal components.
Solenoid & Pilot Valve Assembly Removal
Procedures for removing the solenoid and pilot valve assembly from the flange.
Solenoid and Pilot Valve Servicing
Details on servicing solenoid plunger assembly and pilot valve filter.
Connecting Solenoid to Pilot Valve
Proper procedure for connecting the solenoid to the pilot valve for correct function.
Attaching Solenoid Assembly to Flange
How to properly attach the assembled solenoid and pilot valve to the flange compartment.
Attaching Selector Cap to Solenoid
Steps for correctly orienting and attaching the selector cap onto the solenoid.
Pressure Regulator Purpose and Adjustment
Explains the pressure regulator's purpose and how to adjust its settings.
Pressure Regulator Replacement
Procedures for replacing the pressure regulator unit within the rotor.
Attaching the Flange Compartment Lid
Final steps for installing the flange compartment lid after servicing components.
Need help?
Do you have a question about the G875 and is the answer not in the manual?
Questions and answers