Honeywell RTH6580WF Integration Release Notes

Honeywell WiFi Thermostat
Integration Release Notes
Content
Introduction...1
Installing the Honeywell thermostat...2
Registering the thermostat...3
Enabling auto mode...3
Configuring in Fusion...4
Configuring rules with TCC thermostats...6
Contact information...8
Last modified: 05/03/18

Introduction

The Honeywell WiFi thermostats are a series of WiFi thermostats that have been
tested and certified for integration with the ClareHome system.
When integrating a Honeywell WiFi thermostat into your ClareHome project, no
extra connections are necessary. Install the thermostat according to the
Honeywell documentation, register the thermostat on the Honeywell portal,
enable auto mode in the thermostat, and then connect it to the network using IP.
All HVAC integrations share a common UI, so that the user experience is
consistent. Temperature settings can be controlled via events. Use Fusion's
Scenes and Rules to automate the actions your customers want.
Supported models:
TH9320WF
TH8320WF
TH8321WF
Doc ID - 1188 • Rev 04
RTH-8580WF
RTH9580WF
RTH6580WF
TH6320WF1005/B
1 / 8