Related Manuals for DOGA BA Series
Summarization of Contents
REMARKS ABOUT THE MANUAL
Symbols Explained
Explains warning symbols used in the manual.
Glossary of Acronyms
Lists and defines abbreviations used in the manual.
1. INFORMATION
Important Product Notes
States that the tool may have been altered and how to order replacement parts.
Product Series Overview
Lists the different types and series of slider torque reaction arms.
General Equipment Description
Describes the purpose and functions of the torque reaction arms.
Standard Equipment Presentation
Introduces the presentation of standard equipment models.
Slider 8 and 20 Presentation
Presents the Slider 8 and 20 models with component labels.
Slider 8 Compact Presentation
Details the components of the Slider 8 Compact model.
Slider 20 Compact Presentation
Details the components of the Slider 20 Compact model.
Slider 50 Compact Presentation
Details the components of the Slider 50 Compact model.
Slider BA and BA R Series Components
Presents the Slider BA and BA R series with component labels and part numbers.
Slider BA R & BA RPC Series Components
Details components and part numbers for BA R and BA RPC series.
Position Control Arms (PC & RPC) Presentation
Presents the Slider BA PC/RPC series with components and part numbers.
Slider BA PC Series Details
Provides detailed component information for Slider BA PC models.
Slider BA R & BA RPC Series Specifications
Details components and specifications for Slider BA R and BA RPC series.
1.5 Technical Specifications
Slider 8, 20, & 50 Compact Specifications
Provides technical specifications for Slider 8, 20, and their compact versions.
Slider 150 Compact Specifications
Lists technical specifications for the Slider 150 Compact model.
Slider 15 Cart Specifications
Provides technical specifications and dimensions for the Slider 15 cart.
Slider BA / R / PC / RPC Specifications
Summarizes technical specifications for various BA series models.
Slider BA Mounting Plate Dimensions
Shows dimensions and hole patterns for BA mounting plates.
2. STARTING UP
Workstation Setup Description
Explains how the torque reaction arm is mounted on a workstation.
Unpacking Procedures
Instructions for removing the arm from its packaging and safety precautions.
Customization Options
Mentions customization options and refers to commercial documentation for accessories.
Installation Guide
General installation advice and safety warnings.
Standard Clamp Tool Installation
Step-by-step guide for attaching a tool using a standard clamp.
Rotating Clamp Mounting
Instructions for mounting a screwdriver with a rotating clamp.
BA/BA R Shift Adjustment
Explains how to adjust the position limits for BA/BA R series.
BA R/RPC Inclination Adjustment
Guides on adjusting the forearm inclination for BA R/RPC series.
Balancer Kit Installation
Instructions for installing the balancer kit and safety warning.
PC/RPC Encoder Verification
Details how to connect and verify encoders for PC/RPC series.
Slider 8/20 Compact Height Adjustment
Explains how to adjust the height for Slider 8/20 Compact models.
3. SETTINGS
Balancer Setting Procedure
How to adjust the balancer tension for optimal tool handling.
4. USE
Standard Arm Operation
Describes the manual operation and orientation of the arm.
Position Control Operation
Explains using the arm with position encoders and refers to DPC Touch V2 manual.
5. MAINTENANCE
Maintenance and Adjustment Procedures
Covers general maintenance checks and sliding play adjustment.
Troubleshooting Common Issues
Lists common malfunctions and their corrective actions.
Spare Parts and Support
Guidance on ordering parts, phone support, and client area access.
After-Sales Service and Warranty
Procedures for returns, shipping, on-site repair, and warranty details.
6. SAFETY
General Safety Provisions
Emphasizes manual storage, operator understanding, and symbol meanings.
Risk Assessment and Contra-indications
Covers residual risks (pinching, injury) and usage limitations.
7. STANDARDS
Manufacturer Details and Markings
Provides DOGA's details, equipment designations, torque, capacity, and CE marking.
Transport, Storage, and Recycling
Guidelines for transport, storage, and end-of-life recycling of the equipment.
8. ANNEXES
EC Declaration of Conformity Access
Provides links and QR codes to download the EC Declaration of Conformity.
Need help?
Do you have a question about the BA Series and is the answer not in the manual?
Questions and answers