Advertisement
Advertisement
Related Manuals for Balboa BP6013G2
Summarization of Contents
Control System Operation - Part 1
Balboa Control System (TP600/TP400)
Details on Balboa control systems, including TP600 and TP400 panels.
Control System Start-Up
Procedure for powering up the spa control system and linking the panel.
Control System Basic Operation
Instructions for adjusting temperature and using the light button.
Control System Programming
Guide to navigating and programming the control system menus.
Control System Operation - Part 2
Control System Filtration
Information on factory-programmed and programmable filter cycles.
Dual Temperature Ranges
Explanation of high and low temperature range settings.
Ready and Rest Modes
Details on Ready and Rest modes for maintaining spa temperature.
Complete Reference
Link to download the complete User Interface and Programming Guide.
User Interface and Programming Reference
Overview of standard menus for system navigation and programming.
Control System Operation - Part 3
Spa Filling Procedure
Instructions for filling the spa and preparing for operation.
Priming Mode
Explanation of the spa's priming mode after initial power-up.
Control System Operation - Part 4
Priming the Pump
Detailed steps for priming spa pumps.
Exiting Priming Mode
How to manually exit the priming mode.
Spa Behaviour
How the spa operates, including pumps and blower.
Pump Operation
How to operate spa pumps, including speed settings and time-outs.
Air Pump Operation
How to turn the air pump on and off.
Circulation Pump Modes
Explanation of different modes for the circulation pump.
Control System Operation - Part 5
Filtration and Ozone Operation
How filtration and ozone systems work.
Freeze Protection
How the spa protects itself from freezing.
Clean-up Cycle
Details on the optional clean-up cycle.
Temperature and Temp Range Settings
How to adjust spa temperature and understand temperature ranges.
Adjusting Set Temperature
Guide to changing the spa's set temperature.
Press-and-Hold Temperature Adjustment
How to adjust temperature by pressing and holding a button.
Dual Temperature Range Settings
Explanation of dual temperature range settings.
Control System Operation - Part 6
Ready and Rest Modes
Detailed explanation of Ready and Rest modes for spa heating.
Control System Operation - Part 7
Set Time-of-Day
Instructions for setting the time-of-day for filtration and other features.
Control System Operation - Part 8
Invert Display (Flip)
How to invert the display on the control panel.
Restricting and Operation
How to lock the control panel or temperature.
Control System Operation - Part 9
Unlocking the Control Panel
Procedure for unlocking a restricted control panel.
Hold Mode (Standby)
How to use Hold Mode for service functions.
Drain Mode
Feature for draining water from the spa.
Filtration Settings Adjustment
Main Filtration Settings
Setting start times and durations for main filtration cycles.
Filtration Settings and Timer Programming
Optional Filter Cycle 2
Information on setting up a second filter cycle.
Purge Cycles
How purge cycles work with filter cycles.
Light Timer Programming
How to program the spa light timer.
Light Timer Option Availability
Notes on whether the light timer feature is available.
System Utilities and Information
System Preferences
Settings for temperature display, time format, and reminders.
Temperature Display Units (F/C)
Changing temperature units between Fahrenheit and Celsius.
Time Display Format (12/24 Hour)
Switching the clock display between 12-hour and 24-hour formats.
Reminder Messages
Enabling or disabling maintenance reminder messages.
Cleanup Cycle Settings
Setting the duration for the cleanup cycle.
Dolphin II/III Address Settings
Address settings for Dolphin II and III systems.
System Utilities Details
Software ID (SSID)
Displays the software ID number for the system.
System Model (MODL)
Displays the model number of the spa system.
Current Setup (SETP)
Displays the currently selected configuration setup number.
Additional Utilities
GFCI Test Feature
Instructions for testing the Ground Fault Circuit Interrupter.
Sensor Temperature Display (A/B)
Displaying temperatures from Sensor A and Sensor B.
Fault Log
Viewing a log of the last 24 faults.
Demo Mode
Information on the demo mode for showcasing features.
Troubleshooting and System Messages - Part 1
Heater Related Messages
Messages related to heater flow, dry conditions, and overheating.
Sensor Related Messages
Messages indicating sensor balance or failure.
Miscellaneous Messages
Messages for no communication or pre-production software.
Troubleshooting and System Messages - Part 2
System Related Messages
Messages for memory, configuration, GFCI, and pump errors.
Reminder Messages
Maintenance reminders for pH, chemicals, filters, and GFCI testing.
SPA Model Introduction
SPA Model Materials and Functions
Details on acrylic materials and standard spa functions.
SPA Model Options
Optional fittings and features available for spa models.
Using Parts and Maintenance
Waterproof Bluetooth/Amplifier System Manual
Instructions for connecting and using the waterproof Bluetooth amplifier.
Thermostat Operation
Information regarding thermostat startup time and safety.
Air Pump Operation
Notes on air pump startup time and water level.
Paper Element Filter Daily Maintenance
Step-by-step guide for cleaning and maintaining paper element filters.
Spa Installation Description
Electric Box and Drain Position
Considerations for electric box and drain placement during installation.
SPA Power Cord Requirements
Specifications for power cords and connections for Balboa control systems.
Care and Maintenance
Cleaning the Bathtub
Instructions for cleaning the spa tub with appropriate detergents.
Repairing Scratches
Methods for fixing scratches on the bathtub surface.
Water Scale Removal
How to remove water scale using mild acid detergents.
Cleaning Return Units and Nozzles
Procedure for cleaning water return units and nozzles.
Cleaning Gold and Chrome Parts
Guidelines for cleaning plated parts.
Surface Protection
Tips to protect the spa surface from damage.
Electricity Leakage Check
Monthly checks for electricity leakage.
Instructions on Maintenance
Replace Massage Water Pump
Steps for replacing the spa's massage water pump.
Replace Filter Water Pump
Steps for replacing the spa's filter water pump.
Replace Thermostat
Steps for replacing the spa's thermostat.
Replace Filter Core
Steps for replacing the spa's filter core.
Anti-Frozen Filter Protection
Measures to protect the filter during freezing conditions.
Troubleshooting
Panel Key Issues
Troubleshooting panel lock or breakage.
No Power Supply Issues
Resolving issues with the power circuit and protective switch.
Nozzle Spray Water Issues
Diagnosing problems with water pump, nozzle, or air in pipes.
Underwater Lamp Issues
Troubleshooting issues with the underwater lamp.
Poor Filtering Effect
Addressing issues with filter pump, cleaning, or filter damage.
Constant Temperature Effect Unavailable
Troubleshooting thermostat, power supply, or filter jams.
Warranty Process
Balboa Control System Warranty
Information on handling defective Balboa control systems and warranty claims.
Need help?
Do you have a question about the BP6013G2 and is the answer not in the manual?
Questions and answers