Vanguard VFRMV18PA, VFRMV18NA, VFRMV24NA, VFRMV24PA Owner's Operation And Installation Manual page 13

INSTALLATION
Continued
Note: Install optional GHRCTB Receiver and
Hand-Held Remote Control Kit (see Accessories,
page 26) before installing gas log heater. See in-
stallation instructions included with the kit.
1. Apply pipe joint sealant lightly to male
threads of gas fitting (not provided). Connect
approved flexible gas hose to inlet side of gas
control (see Figure 11).
2. Position heater assembly in fireplace.
3. Connect to gas supply. See Connecting To
Gas Supply.
Flexible Gas Hose
(if allowed by local
codes)
Figure 11 - Attaching Flexible Gas Hose
to Heater Gas Regulator
114745-01B
Gas Control Valve
www.desatech.com 13