Advertisement
Quick Links
Advertisement
Related Manuals for Teral VKP Series
Summarization of Contents
Instruction Manual Overview
Acceptance Checks
Verify product order and check for transport damage before installation.
Specifications and Fluid Usage
Details on pump specs, fluid type, viscosity limits, and their operational impact.
Installation Guide
Installation Location and Conditions
Covers indoor use, ventilation, flat surface mounting, and ambient temperature range.
Pump Orientation and Shaft Seal
Instructions on pump orientation, shaft seal drainage, and immersion type requirements.
Mounting and Port Adjustment
Guidance on mounting bolts and adjusting inlet/outlet positions for specific series.
Piping and Fluid Management
Piping Design and Connections
Best practices for piping length, bends, support, connections, and sealing.
Oil Tank and Fluid Handling
Requirements for oil tank capacity, cleanliness, and preventing contamination.
VKN Series Suction Pipe Limits
Specifies maximum suction pipe length for VKN series and extension guidance.
Electrical Wiring
Wiring Standards and Safety
Conforms to electrical standards, correct terminal connection, and motor grounding.
Pump Operation
Preparation and Priming
Procedures for priming the pump, especially for VKN series, and warnings against dry running.
Non-Priming Series
Identifies VKP (immersion) and VKS (high-pressure immersion) series as not requiring priming.
Direction of Rotation Check
How to check and ensure correct motor rotation direction for pump operation.
Pump Construction and Fluid Levels
Flow Control and Overheating
How to adjust flow via outlet valve and prevent motor overheating.
Fluid Level Monitoring
Importance of maintaining adequate fluid levels to prevent air intake and pump damage.
Fluid Level Definitions
Defines marginal, minimum, and maximum fluid levels based on viscosity and pump type.
Maintenance and Inspection
Routine and Periodical Checks
Checking for vibration, noise, cleaning exterior, oil tank, and noting metal chips.
Mechanical Seal and Bearings
Understanding mechanical seal damage indicators, bearing maintenance, and oil seals.
Safety Warnings
General Operation Precautions
Warnings regarding indoor operation, water spraying, and component installation compliance.
Troubleshooting Guide
Motor Not Turning Issues
Diagnosing and resolving problems like no sound, humming, or motor failure.
Motor Overheating and Vibration
Addressing motor overheating, excessive vibration, or noise during operation.
Pumping and Flow Problems
Resolving issues like no pumping, low flow, reverse rotation, or water hammering.
Product Warranty
Warranty Conditions and Limitations
Details on the one-year warranty, void conditions, and limitations.
Need help?
Do you have a question about the VKP Series and is the answer not in the manual?
Questions and answers