Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Lemania Energy Start Booster 12/24V
Summary of Contents for Lemania Energy Start Booster 12/24V
- Page 1 LEMANIA ENERGY Switzerland START BOOSTER 12V - 24V - 12/24V USER MANUAL ENGLISH...
-
Page 2: Table Of Contents
TABLE OF CONTENTS GENERAL INFORMATION SAFETY PRECAUTIONS FEATURES A. SAFETY FUSE B. ON/OFF SWITCH C. REVERSE POLARITY ALARM D. 12/24V CONNECTOR / SWITCH E. CHARGE STATUS F. CHARGING METHODS OPERATING INSTRUCTIONS A. BATTERY START BOOSTER B. BATTERYLESS START BOOSTER C. HYBRID START BOOSTER SERVICE &... -
Page 3: General Information
GENERAL INFORMATION Thank you for purchasing this handcrafted Start Booster manufactured in Switzerland. This device was designed for professional use only. Our focus is to provide quality Start Boosters for professionals who will depend on them to get the work done. Make sure the user of this Start Booster has read and understood this user manual before the first use. -
Page 4: Safety Precautions
2. SAFETY PRECAUTIONS This device has been designed for trained professionals and according to the codes of practice valid at that time. It is safe to operate, but please make sure to read and understand this user manual beforehand. It can be dangerous if it is used by non-pro- fessionally trained personnel or in an incorrect way. - Page 5 batteries that could be found in home appliances for example. Lead can be dangerous for pregnancy. This device is not meant to be used by people (including children) with reduced physical or mental capabilities, or by people without experience or that have not been previously trained.
-
Page 6: Features
3. FEATURES SAFETY FUSE If your Start Booster is equipped with a Safety Fuse please read the following: Fuses have been developed to protect your Start Booster and vehicle against reverse polarities. If your jump starter is not already equipped with a safety, you still have the possibility to add a new type of clamp with a built-in safety fuse. -
Page 7: On/Off Switch
B. ON/OFF SWITCH If your Start Booster is equipped with an ON/OFF Switch, please read the following. Different types of switches: On the Booster itself. Inside the handle of the negative (black) clamp. On the unit itself, please just turn it OFF or ON according to the labels on the switch. Inside the clamp, push the clip upwards to turn it ON and downwards to turn it OFF. -
Page 8: Charge Status
Before turning it ON, make sure that the clamps are properly connected and that there is no reverse polarity. Then turn the Booster ON to jump start the vehicle. Once the vehicle has started, please remove first the negative clamp, then turn the Booster OFF and then remove the positive clamp. -
Page 9: Operating Instructions
well charged 12V battery. Depending on the size of the battery, it can take up to a few minutes to recharge your Booster. Another way to recharge a Batteryless Start Booster would be to leave it connect- ed for 10-15 seconds maximum to the engine/alternator of the vehicle after it has started. -
Page 10: Batteryless Start Booster
have your car battery or engine checked. It may be that the car battery is defective as well and refuses to accept the current from the Jump Starter. This Start Booster can also be used as a source of power. For example, you can use a 12V OBD Memory Saver cable or 12V LED lights which you can connect to the socket of the Booster. -
Page 11: Service & Maintenance
5. SERVICE & MAINTENANCE No special maintenance is needed on any of the Start Boosters. The most important is to always make sure that your Battery Start Booster or Hybrid Start Booster is always fully charged. Keeping your unit discharged would damage it and void the warranty. - Page 12 LEMANIA ENERGY Switzerland LEMANIA ENERGY SA RUE DE BERNEX 390. 1233 BERNEX, GENEVA SWITZERLAND CONTACT@LEMANIA-ENERGY.COM...
Need help?
Do you have a question about the Start Booster 12/24V and is the answer not in the manual?
Questions and answers