Connections - Panasonic SC-AP01 Owner's Manual

Connections

Connect the AC adaptor to the household AC
outlet.
This system consumes a small amount of AC
power ( 14) even when turned off.
≥ When leaving the product
(DC IN 12 V)
≥ Do not use any other AC adaptors except the supplied
one.
≥ These speakers do not have magnetic shielding. Do not
place them near a television, personal computer or other
devices easily influenced by magnetism.
≥ When moving this unit, be sure to remove the USB cable
and turn this unit to standby mode.
*1: The USB cable is not supplied with this unit. Use the USB cable that is supplied with the compatible device. If a USB
cable is not supplied with the device, be sure to use an appropriate USB cable.
Refer to the operating instructions of the device for details about the appropriate USB cable.
AC adaptor (supplied)
unused for a long time, turn off
the unit and pull the AC
adaptor out of the household
AC outlet for power saving.
Charging from the USB port
When this unit is turned on and a portable music
player that is compatible to USB charging is
connected to this unit's USB port, charging will start
automatically.
≥ It is not possible to play back the music on the
connected device from this unit's speakers or
operate the device from this unit through this
connection.
≥ Refer to the operating instructions of the device
for details about charging.
Preparation
Turn this unit on.
1
Connect the compatible device to this unit
with an appropriate USB cable.
USB cable*
(DC OUT 5 V, 2.1 A MAX)
≥ Refer to the connected device to check if the
device is fully charged.
2
Once fully charged, remove the USB
cable from this unit.
≥ There is no charging during standby mode.
≥ This unit is capable of charging up to a load of 2.1 A.
≥ When fully charged, this unit will not stop the charging
automatically. Remove the USB cable from this unit once
the connected device is fully charged.
To the
compatible
device
1
5
RQT9655