Launching Scandall Pro; Selecting A Scanner Driver - Fujitsu fi-6230 Operator's Manual

fi-6130 / fi-6230 Image Scanner Operator's Guide
2.6 How to Use ScandAll PRO
ScandAll PRO is software for scanning images, which is in conformity with both TWAN/ISIS standards. Using the FUJITSU
TWAIN 32 or FUJITSU ISIS scanner driver together with ScandAll PRO allows you to create document images.
The following explains how to scan documents with the scanner through ScandAll PRO.
HINT
For information about the features of ScandAll PRO, refer to ScandAll PRO Help.

Launching ScandAll PRO

From the [Start] menu, select [All Programs] [Fujitsu ScandAll PRO] [Fujitsu ScandAll PRO].
ScandAll PRO starts up.

Selecting a Scanner Driver

ScandAll PRO supports both TWAIN and ISIS standards and allows you to invoke either the TWAIN driver or the ISIS
driver for scanning images with the scanner. This scanner comes with two drivers, FUJITSU TWAIN 32 Scanner Driver
and FUJITSU ISIS Scanner Driver, which you can use with this scanner.
The following explains how to select a scanner driver with ScandAll PRO (how to switch between the FUJITSU TWAIN and
ISIS scanner drivers).
TROUBLESHOOTING
CONTENTS MAP
TOP