Electrolux WPB4900H Installation Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Washer
  5. WPB4900H
  6. Installation manual

Electrolux WPB4900H Installation Manual

Washer-extractors
Hide thumbs

Advertisement

Table of Contents

Installation manual
Washer-extractors
WP4700H – WP4900H – WP41100H
WPB4700H – WPB4900H – WPB41100H
Translated from french
05201053/GB
06.18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WPB4900H and is the answer not in the manual?

Questions and answers

Related Manuals for Electrolux WPB4900H

Summary of Contents for Electrolux WPB4900H

  • Page 1 Installation manual Washer-extractors WP4700H – WP4900H – WP41100H WPB4700H – WPB4900H – WPB41100H Translated from french 05201053/GB 06.18...
  • Page 3 05201053 2413 INSTALLATION Notice Date Page 0. Table of contents MANUAL Pages/Chapters General instructions Environmental information ................... Preliminary instructions ....................Locking and tagging procedure ..................Handling/Weight Handling ........................Packing - Weight ......................Technical characteristics Technical characteristics ....................Sound level ........................13/6 Installation/Putting into service Installation ........................

  • Page 4: Environmental Information

    2413 05201053 1. Environmental INSTALLATION Notice Date Page information MANUAL Environmental information Concerned by providing the end user with useful and necessary environmental information, we wish to precise :  Data about energetic consumptions, wastes (atmospheric and liquid) and sound level are indicated in the paragraph "Technical characteristics".

  • Page 5: Preliminary Instructions

    05201053 2413 2. Preliminary INSTALLATION Notice Date Page MANUAL instructions Preliminary instructions Before any use, it is compulsory to read the instruction handbook. Users must have learnt how the machine operates. The identifi cation plate is placed on the loading side of the machine. In order to prevent any risk of fi...
  • Page 6 2413 05201053 2. Preliminary INSTALLATION Notice Date Page instructions MANUAL CAUTION This machine should be installed in conformance to the health and safety regulations, and only used in a suffi ciently aerated area. Check the instructions before installing or using the machine. SAFETY The mechanical and electrical installation of the machine should only be done by...
  • Page 7 05201053 2413 2. Preliminary INSTALLATION Notice Date Page MANUAL instructions Ensure that the machine is not loaded beyond its nominal capacity (see "Specifi c load" in the instruction booklet’s technical characteristics). An excessive load has consequences for the lifetime of the machine’s organs, as follows : •...
  • Page 8 05201053 2413 2. Preliminary INSTALLATION Notice Date Page instructions MANUAL Distributor Letter CHEMICAL SYSTEM RESPONSABILITY DISCLAIMER The following policy should be considered and understood as a warranty/disclaimer to customers operating textile care installations where liquid supply (chemical) systems use or may use peristaltic pumps to inject supplies into equipment.

  • Page 9: Locking And Tagging Procedure

    05201053 2413 3. Locking and INSTALLATION Notice Date Page MANUAL tagging procedure Locking and tagging procedure A red insert at the beginning of this instruction handbook schematically shows the locking and tagging procedure described below. If you wish, you can detach this insert and display it close to the machine to remind maintenance personnel of the safety instructions.
  • Page 10 05201053 2413 INSTALLATION Notice Date Page 4. Handling MANUAL Handling Before any handling, check that the four transport locks fi tted (B) are still in place and well-tightened, and so the four casing locks (A). To do so, remove the side casings and check presence of four locks (B) and the down casings for the four locks (A).
  • Page 11 05201053 2413 INSTALLATION Notice Date Page 4. Handling MANUAL CAUTION You should never handle the machine in its longitudinal side (any other than shown on the drawing below) with a fork- lift truck. Important risk of parts deterioration for those fi xed under the machine. 2/ Lifting with a fork-lift truck This can be carried out from the front or back, and at the centre of the machine using forks with minimum length of 1,50 m (59").
  • Page 12 2413 05201053 INSTALLATION Notice Date Page 4. Handling MANUAL CAUTION In order to avoid any bending of casings, you should never climb and stand on top of the machine.

  • Page 13: Packing - Weight

    05201053 2413 INSTALLATION Notice Date Page 5. Packing - Weight MANUAL Packing Packing dimensions in mm/inch Size A Size B Size C Washer extractor Type 700 1690/67" 1720/68" 2330/92" Washer extractor Type 900 1670/66" 1970/78" 2330/92" Washer extractor Type 1100 1680/66"...

  • Page 14: Technical Characteristics

    05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Washer extractor type 700 standard Left view Front view > 1 m/40” 790/ 31.05” 145/5.67” H1- H2 - H3 305/11.99” 575/ 390/ 15.33” 22.59” 1363/53.56” 1496/58.79” 1423/55.92” Top view Ø 110/4.33” >...
  • Page 15 2413 05201053 6.Technical INSTALLATION Notice Date Page MANUAL characteristics Washer extractor type 700 standard Diagram No. 07100140 Heating Electric Steam Thermic fl uid Characteristics Ø drum ------------------------------------------------ 1050 mm - 41.33" ----------------------- Drum length ------------------------------------------ 794 mm - 31.26" ----------------------- Opening drum door (LxH) ------------------------ --- 670x490 mm - 26.37x19.3"...
  • Page 16 05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Washer extractor type 900 standard Front view Left view > 1 m/40” 790/ 31.05” 145/5.67” H1- H2 - H3 305/11.99” 690/ 390/ 15.33” 1363/53.56” 27.11” 1726/67.83” 1423/55.92” Top view Ø 110/4.33” >...
  • Page 17 2413 05201053 6.Technical INSTALLATION Notice Date Page MANUAL characteristics Washer extractor type 900 standard Diagram No. 07100138 Heating Electric Steam Thermic fl uid Characteristics Ø drum ------------------------------------------------ 1050 mm - 41.33" ----------------------- Drum length ------------------------------------------ 1026 mm - 40.39" ----------------------- Opening drum door (LxH) ------------------------ --- 900x490 mm - 35.43x19.3"...
  • Page 18 05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Washer extractor type 1100 standard Front view Left view > 1 m/40” 790/ 31.05” 145/5.67” H1- H2 - H3 305/11.99” 805/31.63” 390/15.33” 1363/53.56” 1956/76.87” 1423/55.92” Top view Ø 110/4.33” > 1 m/40” >...
  • Page 19 2513 05201053 6.Technical INSTALLATION Notice Date Page MANUAL characteristics Washer extractor type 1100 standard Diagram No. 07100136 Heating Electric Steam Thermic fl uid Characteristics Ø drum ------------------------------------------------ 1050 mm - 41.33" ----------------------- Drum length ------------------------------------------ 1256 mm - 49.45" ----------------------- Opening drum door (LxH) ------------------------ --- 900x490 mm - 35.43x19.3"...
  • Page 20 05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Washer extractor type 700 barrier Front view Right view 790/ 830/33” 31.05” 5.67” 305/11.99” H1-H2-H3 390/ 575/22.59” 15.33” 1363/53.56” 1496/58.79” 1483/58.28” Top view > 1 m/40” > 1 m/40” 1496/58.79” 82/3.2” 100/3.93”...
  • Page 21 2413 05201053 6.Technical INSTALLATION Notice Date Page MANUAL characteristics Washer extractor type 700 barrier Diagram No. 07100141 Heating Electric Steam Thermic fl uid Characteristics Ø drum ------------------------------------------------ 1050 mm - 41.33" ----------------------- Drum length ------------------------------------------ 794 mm - 31.26" ----------------------- Opening drum door (LxH) ------------------------ --- 670x490 mm - 26.37x19.3"...
  • Page 22 05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Washer extractor type 900 barrier Front view Right view 790/ 830/33” 31.05” 5.67” 305/11.99” H1-H2-H3 390/ 690/27.11” 15.33” 1363/53.56” 1726/67.83” 1483/58.28” Top view > 1 m/40” > 1 m/40” 1726/67.83” 82/3.2” 100/3.93”...
  • Page 23 2413 05201053 6.Technical INSTALLATION Notice Date Page MANUAL characteristics Washer extractor type 900 barrier Diagram No. 07100139 Heating Electric Steam Thermic fl uid Characteristics Ø drum ------------------------------------------------ 1050 mm - 41.33" ----------------------- Drum length ------------------------------------------ 1026 mm - 40.39" ----------------------- Opening drum door (LxH) ------------------------ --- 900x490 mm - 35.43x19.3"...
  • Page 24 05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Washer extractor type 1100 barrier Front view Right view 790/ 830/33” 31.05” 5.67” 305/11.99” H1-H2-H3 390/ 805/31.63” 15.33” 1363/53.56” 1956/76.87” 1483/58.28” Top view > 1 m/40” > 1 m/40” 1956/76.87” 82/3.2” 100/3.93”...
  • Page 25 05201053 2413 6.Technical INSTALLATION Notice Date Page MANUAL characteristics Washer extractor type 1100 barrier Diagram No. 07100137 Heating Electric Steam Thermic fl uid Characteristics Ø drum ------------------------------------------------ 1050 mm - 41.33" ----------------------- Drum length ------------------------------------------ 1256 mm - 49.45" ----------------------- Opening drum door (LxH) ------------------------ --- 900x490 mm - 35.43x19.3"...

  • Page 26: Sound Level

    05201053 2413 6.Technical INSTALLATION Notice Date Page characteristics MANUAL Sound level Airborne noise emitted by the machine (values established from measurements made on machine at points A, B, C, and D). (40”) Weighted sound pressure level (A) D0267 in dB (A) Washer 700 Washer 900 Washer 1100...
  • Page 27 05201053 2413 6.Technical INSTALLATION Notice Date Page MANUAL characteristics This page is left blank on purpose.
  • Page 28 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL You should have found an instruction handbook and keys to open the machine casings, in the machine. Depending on its destination, the washer extractor is delivered bare or may be placed on a transport pallet and/or packed with plastic fi...

  • Page 29: Working Place Lighting

    05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Working place lighting The lighting should be designed so as to avoid eye strain for the operator ; it should be uniform without any glare, and should be suffi cient to detect any hazards. The average lighting value on the working place recommended by the clothing industry for inspecting linen is 500 lux.
  • Page 30 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Instructions for securing the machine on the ground Place the machine on a perfectly even surface and horizontal. Control this using a water level (see drawing). WPB4 700 910 mm Each point must be level.

  • Page 31: Mechanical Installation

    2413 05201053 INSTALLATION Notice Date Page 7. Installation MANUAL Mechanical installation Setting of the bolsters Preparation of the ground and machine : - Clean carefully the ground and the soles of the machine. Setting the bolsters : - Place each bolster (G) at its respective location (see drawing) and heave successively each bearing of the machine.
  • Page 32 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Instructions for installation of the washer with barrier partition The barrier partition (O) (provided by customer) should be assembled before the installation of the machine. Centre and align the washer-extractor with the frame (P) 60 x 100 mm (2x4") maximum (provided by customer).
  • Page 33 2413 05201053 INSTALLATION Notice Date Page 7. Installation MANUAL Waters connections Washer extractors are assembled in standard execution with two waters inlet. One hot water and one hard water. On option, a third water inlet (soft) is possible. It is strictly forbidden to use the electrical control of the third water to drive any equipment.
  • Page 34 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Adjustment of the water pressure (kit 56000183) The factory setting is 3 bar for the pressure. You must adjust the electrovalves according to the water pressure of your network : - Unscrew the nut (C) of each electrovalve and screw the screw (B) up to the end, - For a 1 bar pressure, unscrew the screw (B) of 17 1/3 rounds (26 mm).
  • Page 35 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Steam connection (standard) The inlet pipe to the machine has to be fi t with a manual stopping valve to ease installation and maintenance and a fl exible steam supply pipe to allow reliable running of automatic weighting system.
  • Page 36 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Steam connection (low pressure) The inlet pipe to the machine has to be fi t with a manual stopping valve to ease installation and maintenance and a fl exible steam supply pipe to allow reliable running of automatic weighting system.

  • Page 37: Drain Connection

    05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Drain connection The machine's exhaust sleeve is outside diameter 110 mm (4.33"). It is located underneath the machine. The waste water collector diameter 200 mm (7.87") (manufactured by customer) should have a 3 cm/m (3 %) slope and resist to a temperature of 90°C (194°F).

  • Page 38: Air Vent Connection

    05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Air vent connection Air vent The air vent of the drum opens on the top of the machine. Connect the bent hose to this opening. Connect the air vent, to the outside of the laundry in accordance with tte legislation.

  • Page 39: Liquid Detergents' Connection

    05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Liquid detergents' connection External liquid The machine is equiped with a connection for the use of external liquid detergents. detergents If you do not use the detergent box, please use the cap delivered with the machine in order to avoid vapour from steaming out through the opening of the box downpipe.
  • Page 40 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL CAUTION The running of detergents must be independent from the running of the machine. The control information of detergents must imperatively be relayed. It is imperative to use armoured wires for every connection in the electrical box.
  • Page 41 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Connection on the A8 output relay card The output relay card allows to connect from Electrical installation must be 1 to 16 electrovalves of liquid detergents. carried out by an authorized personnel.
  • Page 42 05201053 0618 INSTALLATION Notice Date Page 7. Installation MANUAL Washer-extractor electricity power supply CAUTION Prior to use, the washer-extractor should be plugged into a correctly earthed power socket complying with the standards in force. SAFETY The electrical installation of the machine must be undertaken by qualifi...
  • Page 43 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Pass the power supply cable of the machine Stuffi ng box trough the stuffi ng box on the top of the machine. Caution : the main switch must be removed in order to have easy access to the connection terminals.
  • Page 44 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Connection diagrams for the control circuit power supply (T1) The tension of the control circuit delivered by the power supply must be 24 volts dc. The supply tension for your machine is normally of 400 volts between phases, this tension can however be different.
  • Page 45 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL The feeder cable sections mentioned in our literature are given only as a guide. To obtain a value perfectly suited to your own application and which takes account of the different correction factors in respect of your plant, refer to the tables below. Table 1 (in accordance with EN Standard 60204-1) Values given for :...
  • Page 46 05201053 0618 INSTALLATION 7. Installation Notice Date Page MANUAL Table 4 (B2, C and E correction factors for cable grouping) Number Seated in Wall Fixing Cable of cables Cable Duct or Cable Trough Tray 1.00 1.00 1.00 0.80 0.85 0.87 0.65 0.75 0.78...

  • Page 47: Compressed Air Connection

    05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Compressed air connection The customer should arrange the installation Compressed of fi lter/lubricator device, as well as a pressure regulator (manometer) on the machine's compressed air supply. The manual stopping valve lockable in closed position (provided by customer) should be installed on the machine's compressed air supply.

  • Page 48: Remove Of The Transport Locks Fi Tted

    05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Remove of the transport locks fi tted CAUTION Before putting the machine into service, it is compulsory to remove the 4 transport locks fi tted. To do so, remove the side casings, then the fi...
  • Page 49 05201053 2413 INSTALLATION Notice Date Page 7. Installation MANUAL Magnetic detector for tank door safety CAUTION Before starting the appliance, please remove the bottom guard and check that the magnetic detector is correctly aligned. NOTE: For barrier machines, repeat this step on the second door.

  • Page 50: Operating Inspection

    05201053 2413 8. Operating INSTALLATION Notice Date Page inspection MANUAL Operating inspection Before putting the machine into service, carry out the working tests. The operating inspection must be done by an approved technician. Manual operation The procedure for operating the various machine functions manually is described in the chapter "Machine operation"...
  • Page 51 05201053 2413 8. Operating INSTALLATION Notice Date Page MANUAL inspection • Check the direction of rotation of the motion motor fan (see arrow stuck on the fan). Switch off the current and shift two phases on the main switch of the machine if the fan rotates in the wrong direction.

  • Page 52: Explanation Of Washing Symbols

    05201053 2413 INSTALLATION Notice Date Page 9. Appendices MANUAL Explanation of washing symbols To overcome language barriers, the following are symbols used internationally to give you guidance and (ISO 3758:2005 standard) recommendations when washing different textiles. The tub symbolizes washing. The circle symbolizes dry or Washing Dry or water...

  • Page 53: Conversion Of Measurement Units

    2413 05201053 INSTALLATION Notice 9. Appendices Date Page MANUAL Conversion of measurement units The following is a list of correspondences of the main frequently used units, to avoid the need to use measurement unit conversion tables. bar : 1 bar = 100 000 Pa 1 kg/cm²...
  • Page 54 05201053 2413 INSTALLATION Notice Date Page 9. Appendices MANUAL This page is left blank on purpose.
  • Page 56 Electrolux Laundry Systems Sweden AB 341 80 Ljungby, Sweden www.electrolux.com/professional Share more of our thinking at www.electrolux.com...

Table of Contents