Advertisement
Quick Links
Pendulum Spreaders
PFS4000, PFS5060 & PFS8010
PFS4000
30752
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
PFS5060 (Shown) & PFS8010
309-124M
Operator's Manual
Printed 11/20/20
Advertisement
Related Manuals for Land Pride PFS5060
Summarization of Contents
Important Safety Information
Safety at All Times
General safety rules for operating the spreader and tractor.
Practice Safe Maintenance
Guidelines for performing maintenance safely and correctly.
Wear Personal Protective Equipment (PPE)
Specifies required protective clothing and equipment for safe operation.
Introduction
Using This Manual
Guidance on how to use the operator's manual for effective operation.
Owner Assistance
Information on obtaining support and ordering replacement parts.
Section 1: Drive Unit Assembly
Tractor Requirements
Specifies horsepower and weight requirements for the tractor.
Pendulum Flange Assembly
Instructions for assembling the pendulum flange.
Shaft Shield Assembly
Steps for installing the shaft shield and related components.
Section 2: PFS4000 Assembly & Set-Up
Drive Unit Assembly to Main Frame
Guidance on attaching the drive unit to the main frame for the PFS4000.
Hopper Assembly
Steps for assembling the hopper onto the main frame.
Section 3: PFS5060 Assembly & Set-Up
Drive Unit Assembly to Main Frame
Instructions for attaching the drive unit to the main frame for PFS5060.
Hopper Support Frame Assembly
Steps to assemble the support frame for the hopper.
Gate Lever Assembly
Instructions for assembling and adjusting the gate lever.
Section 4: PFS8010 Assembly & Set-Up
Connecting Hooks & Hook-Up Bar
Instructions for connecting the hooks and hook-up bar.
Drive Unit Assembly to Main Frame
Steps for attaching the drive unit to the main frame for PFS8010.
Section 5: Driveline Assembly & Set-Up
Tractor 3-Point Hook-Up
Procedures for connecting the spreader to the tractor's 3-point hitch.
Driveline Installation
Step-by-step guide for installing the driveline.
Check Driveline Collapsible Length
How to check and ensure proper driveline collapsed length.
Section 6: Options & Accessories
PFS5060 Hydraulic Gate Kit
Installation instructions for the hydraulic gate kit on PFS5060.
Small Seed Kit
Instructions for installing the small seed limiter kit.
Spout Accessories
Information on different spout options and their applications.
Section 7: Operating Procedures
Operating Checklist
Pre-operation inspections and checks for the spreader.
Leveling & Setting Spreader Height
Procedures for correctly leveling and setting the spreader height.
Set Hopper Discharge Rate
Steps to adjust the hopper discharge rate for product application.
Section 8: Adjustments
English System of Measurements
Explains adjustments using the English measurement system.
Spout Swing Angle (English System)
How to adjust the spout swing angle for different spread widths.
Stationary Calibration (English System)
Method for calibrating the spreader without a field test.
Section 9: Maintenance & Lubrication
General Maintenance
Routine maintenance tasks to ensure longevity and performance.
Lubrication
Details on lubrication points, types, and intervals.
Need help?
Do you have a question about the PFS5060 and is the answer not in the manual?
Questions and answers