Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Murska 1000HD
Summarization of Contents
Description
Purpose of Use
Explains the intended applications of the crimping machine for feed grains.
Manufacturing Origin
States that the product is manufactured in Finland (EU).
Technical Information
Machine Specifications
Details technical parameters like crimping capacity, power, hopper size, dimensions, and weight.
Roller Specifications
Lists roller types, length, and diameter for the machine.
Extra Accessories
Outlines available optional accessories for the machine.
Start-Up
Start-up After Delivery
Step-by-step guide for initial setup and assembly after receiving the machine.
Connecting to Tractor
Instructions on how to connect the Murska crimper to a tractor.
Instructions for Use
Routine Checks Before Use
Details daily and pre-operation checks to ensure the machine is ready.
Adjusting Rollers
Explains how to adjust roller clearance and tension for optimal crimping.
Start-up, Crimping, and Use
Guides on starting the machine, the crimping process, and ongoing operation.
Ending Crimping
Procedures for safely stopping the machine and completing the crimping process.
Roller Adjustment
Adjusting Rollers During Crimping
Describes how to fine-tune roller settings while the machine is in operation.
Brakes
Bagger Brakes
Details the hydraulic hand pump system used for braking on the bagger model.
Maintenance
Daily Maintenance
Outlines essential daily checks and cleaning tasks for the machine.
After the Season Maintenance
Procedures for cleaning, storing, and protecting the machine at the end of the season.
Lubrication Points
Identifies key lubrication points and recommended lubricant for the machine.
Instructions
Changing the Roller Cassette
Step-by-step guide on how to replace the roller cassette assembly.
Screw Torque
Pulley Assembly
Instructions for assembling and tightening pulleys using taper hubs.
Possible Disruptions
Low Power, Doughy Rollers, Overheating
Troubleshooting steps for issues like low power, doughy rollers, and overheating.
Crimped Grain Quality Issues
Solutions for problems with unground grain or dough balls in the crimped output.
Feeder Issues
How to resolve a stuck feeder or no grain feed.
Scraper Knife Noise
Diagnosing and fixing unusual noise from the scraper knives.
Auger Clogging
Addressing issues related to the auger becoming clogged.
Slip Clutch Failure
Troubleshooting causes and solutions for slip clutch malfunctions.
Coarse Crimping Result
Adjustments to achieve a finer crimping result.
Insufficient Output / Non-Crimping Grain
Solutions for when grain is not crimped or output is insufficient.
Need help?
Do you have a question about the 1000HD and is the answer not in the manual?
Questions and answers