Related Manuals for ELMON 41-322
Summarization of Contents
Application Example
2-Wire Single Application Example
Illustrates a 2-wire single application example for safety relays.
4-Wire Single Application Example
Illustrates a 4-wire single application example for safety relays.
2-Wire Multiple Application Example
Illustrates a 2-wire multiple application example for safety relays.
4-Wire Multiple Application Example
Illustrates a 4-wire multiple application example for safety relays.
Device Overview
Versions
Lists the different versions of the ELMON rail safety relays.
Signal Indicators
Describes the function of the LEDs for status and fault indication.
Connection Terminals
Details the purpose and connection assignments of the device terminals.
DIP Switch for Configuring the Operating Mode
Explains how to configure the operating mode using DIP switches.
Operating Modes
Safety Output
Describes the safety output configuration for control circuits.
Automatic Reset
Details the automatic reset function after a fault or voltage failure.
Fault Self-Retaining – Manual Reset
Explains the manual reset procedure for fault self-retaining mode.
Signaling Output Without Any Delay (RLU)
Describes the signaling output behavior without delay (RLU).
Signaling Output Delayed (RL)
Describes the signaling output behavior with a delay (RL).
Electrical Connection
Supply Voltage
Details the allowed supply voltage options and connection points.
Connection of Sensor
Explains how to connect the sensor to the device terminals.
Connection of Several Sensors per Sensor Circuit
Describes how to connect multiple sensors in a sensor circuit.
Connection of Control Circuits
Details the connection of control circuits and protection measures.
Connection Reset
Explains the connection for the manual reset function.
Connection of Signaling Contact
Describes the connection and limitations of the signaling contact.
Need help?
Do you have a question about the 41-322 and is the answer not in the manual?
Questions and answers