Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fermax 9532
Summarization of Contents
2 WEB BROWSER PROGRAMMING
Device Specifications
Provides technical information regarding the equipment as a reference.
General Settings
Allows configuration of identification parameters and time-date settings.
Network Configuration
Allows configuration of the different parameters of the LAN network.
Access Control Configuration
Allows programming related to the access control functionality of the panel.
Face Recognition Configuration
Enables or disables the FACE RECOGNITION function of the panel.
IP Camera Setup
Allows configuration of IP CCTV cameras for auxiliary display during conversations.
SIP Configuration
Configures MILO panel for SIP functionalities like smartphone divert.
SIP Trunk Configuration
Configures panel call diversion to mobile/landline via VoIP gateway.
SIP Call Routing
Generates calls to smartphone devices when no MEET monitor is associated.
Advanced Settings
Configures advanced settings like quick dial and directory.
PIN Code Management
Allows changing the INSTALLER PIN code for configuration access.
Factory Reset and Reboot
Resets the MILO panel to factory settings or reboots the device.
Web Server Log Out
Ends the working session with the panel via web server.
3 OPERATION
Apartment Calling Procedure
Explains how users dial apartment numbers via keypad and call states.
Face Recognition Usage
Allows users to be identified by facial recognition to open the door.
Access PIN Usage
Allows users to open the door by entering an ACCESS PIN code.
Guest Code Usage
Allows users to open the door using a numerical GUEST CODE.
On-Screen Information
Retrieves basic information on equipment configuration via the screen.
4 INSTALLATION
Flush Box Mounting
Instructions for installing the flush box for the panel.
Panel Installation Diagram
Step-by-step diagram for mounting the panel into the flush box.
Panel Connector Guide
Details the panel's connectors for LAN, power, RS-485, and sensors.
Basic Wiring Schematics
Illustrates basic wiring diagrams for power supply and electric lock.
4 Relay Module Installation
Details installation of the 4 RELAY MODULE for activating additional relays.
Guest Code Module Installation
Diagram for installing the GUEST CODE MODULE Ref. 1494.
Lift System Integration Diagram
Diagram for installing the lift control system integration.
5 TECHNICAL SPECIFICATIONS
Power and Current Specs
Specifies power supply requirements and operating currents.
Display Technical Specs
Details display size, format, resolution, view angle, contrast, brightness.
Audio Technical Specs
Details audio codec and OLR.
Camera Technical Specs
Details camera type, CMOS colour, pixels, illumination, AWB.
Environmental Specs
Details operating temperature, humidity, and IP rating.
Operational Parameters
Specifies operational times, card capacity, and face data storage.
6 ANNEX
Firmware Update Procedure
Procedure for updating the panel firmware using the MEET System Upgraded Tool.
Regulatory Compliance
EC Declaration of Conformity and FCC rules for radio frequency equipment.
Need help?
Do you have a question about the 9532 and is the answer not in the manual?
Questions and answers