Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ace FMC-150F-HYD Series
Summarization of Contents
STANDARD WARRANTY
PLEASE NOTE EXCEPTIONS
Details specific exclusions from the standard warranty coverage.
PROCEDURE
Outlines the steps for returning a product for warranty consideration.
WARNINGS
AVOID HIGH PRESSURE FLUIDS
Warns about injury risks from escaping high-pressure hydraulic fluid.
NEVER OPERATE MOTOR UNLESS ATTACHED TO PUMP
Caution against operating the motor separately from the pump to prevent damage.
HANDLE CHEMICAL PRODUCTS SAFELY
Advises on safe handling of chemicals used with pumps, referencing MSDS.
HYDRAULIC MOTOR FEATURES
Coasting Check
Explains the internal feature protecting the motor seal from impeller flywheel effect.
Needle Valve
Describes the function and location of the needle valve for fluid bypass.
Reverse Flow Check
Details the check valve that prevents the pump from running backward.
REGULATING HYDRAULIC FLOW TO THE SPRAYER PUMP
SHUT-OFF PRESSURE
Defines shut-off pressure and lists maximum allowable pressures for specific pump models.
LOAD SENSING CLOSED CENTER SYSTEM
Provides setup instructions for regulating flow in LS systems using flow control and limiter.
MOTOR REPAIR KIT INSTALLATION
ASSEMBLY
Detailed steps for reassembling the hydraulic motor components after repair.
TROUBLESHOOTING
WILL NOT PUMP LIQUID
Identifies reasons why the pump may not be pumping liquid.
WILL NOT DEVELOP PRESSURE
Lists factors contributing to a pump's inability to develop adequate pressure.
SEAL LEAKS
Directs users to relevant sections for information on reducing seal leak frequency.
LOSES PRESSURE GRADUALLY OVER SEVERAL HOURS
Explains that oil heating due to bypass flows or restrictions causes gradual pressure loss.
Need help?
Do you have a question about the FMC-150F-HYD Series and is the answer not in the manual?
Questions and answers