Related Manuals for Gandy 1010T
Summarization of Contents
Extra Equipment
Deflectors
Components for banding or side-dressing fertilizer applications.
Spread Plates
Plates for spreading material, available for specific models.
Calibration Pan
Tool for calibrating spreader application rates.
Hole Closures
Components to close openings for banding or side-dressing.
Care and Maintenance
Assembly
Instructions for proper initial assembly of the spreader.
Lubrication
Guide on greasing points and frequency for optimal performance.
Field Operation and Calibration
Safety Decals and Warnings
Important safety notices and cautions for operating the spreader.
Calibration Pan Method
Using calibration pans to measure material output for rate setting.
Known Area Method
Calculating application rate by treating a known area.
Hopper Assembly
Hubs and Wheels
Instructions for installing axles, hubs, and wheels.
Rain Trough and Rotors
Steps for attaching the rain trough and installing rotors.
Poles and Braces
Guide for attaching poles and supporting braces to the frame.
Center Brace
Instructions for installing the center brace for structural support.
Assembly Procedures
Slide-Knee Lever Connection
Connecting the slide control linkage to the hopper lever.
Shut-off Lever
Installing and adjusting the main shut-off lever mechanism.
Drag Link-Shutoff Lever
Connecting the drag link to the shut-off lever for control.
Lids and Locks
Installing hopper lids and securing them with locks.
Specifications
Models and Sizes
Overview of available spreader models and their physical dimensions.
Hopper Specifications
Details on hopper capacity, material, and opening dimensions.
Drive Systems and Wheels
Information on ground drive, hydraulic/electric drives, and wheel types.
Need help?
Do you have a question about the 1010T and is the answer not in the manual?
Questions and answers