Advertisement
Quick Links
Advertisement
Related Manuals for Fein WSG 15 PR
Summarization of Contents
Removal
Removing the handle
Steps to detach the handle from the power tool for repair or maintenance.
Removing the electronics
Procedure for safely disconnecting and removing the electronic components from the tool.
Removing the carbon brushes (on both sides)
Detailed steps for accessing and removing the carbon brushes from both sides of the motor.
Removing the gearbox housing
Instructions for disassembling and separating the gearbox housing from the main body.
Removing the stator
Guide on how to detach the stator assembly from the motor housing.
Removing the armature
Steps involved in safely extracting the armature from the motor assembly.
Fitting
Fitting the gearbox housing
Reassembly instructions for the gearbox housing onto the motor unit.
Fitting the gearbox housing (applies to: WSG 17)
Specific steps for fitting the gearbox housing for WSG 17 models.
Fitting the armature
Procedure for installing the armature correctly into the gearbox or motor assembly.
Fitting the stator
Guide for installing the stator into the tool's housing.
Fitting the gearbox head
Instructions for attaching the gearbox head to the motor housing.
Fitting the carbon brushes (WSG 11 230 V; WSG 15 230 V)
Steps for installing carbon brushes on 230V models.
Fitting the carbon brushes (WSG 11 120 V; WSG 15 120 V)
Steps for installing carbon brushes on 120V models.
Fitting the carbon brushes (WSG 11 110 V with choke)
Instructions for fitting carbon brushes on 110V models with choke.
Fitting the switch
Procedure for installing the main power switch into the tool's housing.
Fitting the switch (WSG 11-120V)
Specific steps for fitting the switch on WSG 11-120V models.
Fitting the carbon brushes (on both sides)
Guide for installing carbon brushes on both sides of the motor.
Fitting the electronics
Procedure for installing the main electronic control unit into the tool.
Fitting the handle (WSG 11 110 V/230 V; WSG 15 120 V/230 V)
Steps to attach the handle shell on specific voltage models.
Fitting the choke (WSG 11 110 V with choke)
Instructions for installing the choke component for 110V models.
Fitting the handle (WSG 11 120 V)
Steps for fitting the handle on WSG 11 120V models.
Fitting the handle
General steps for closing and securing the handle halves.
Setting gearbox clearance
Procedure for adjusting and checking the clearance of the gearbox.
Connection diagram
Connection diagram
Wiring schematic illustrating the electrical connections for various models and voltages.
Need help?
Do you have a question about the WSG 15 PR and is the answer not in the manual?
Questions and answers