Advertisement
Quick Links
Advertisement
Related Manuals for Spectrum A160
Summarization of Contents
Product Description
LCD Display and Symbols
Explains the LCD screen layout, data displayed, and the meaning of various symbols.
Installation and Operation
Control Buttons
Details the function of each button used to operate the data logger.
Device Operation
Covers powering on, taking measurements, switching temperature displays, and viewing min/max readings.
Set CO2 Alarm
Configures the upper and lower limits for the CO2 alarm indicator.
Set Temperature Units
Allows selection between Celsius (°C) and Fahrenheit (°F) for temperature display.
Set Real Time Clock
Guides on setting the year, month, day, and time for the logger.
Reset Device Settings
Procedure to reset the A160 logger back to its default factory settings.
CO2 Manual Calibration
Instructions for manually calibrating the CO2 sensor under specific environmental conditions.
Connecting to the Computer
Software and Cable Requirements
Specifies the required SpecWare version, A-Series PC Connection Cable, and driver installation.
Connection Process
Explains how SpecWare detects the COM port and the physical connection of the cable.
Data Transfer Timing
Clarifies that connection is only needed for launching and downloading data.
SpecWare Software
Software Version Support
Confirms support for SpecWare version 9.03 and above for the A160 logger.
Initializing Logger
Steps for initializing a new logger, including serial number and type selection.
Logger Location Names
Explains how SpecWare uses serial numbers to manage logger locations.
Launching Loggers
Describes the process of configuring and starting data collection for a logger.
SpecWare Toolbar Functions
Details toolbar options for setting logging intervals and launching the logger.
Downloading Data
Procedure for retrieving logged data from the logger using SpecWare.
Charts and Reports
Overview of generating charts and reports from the collected data.
Trouble Shooting
Logger Not Powering On
Troubleshooting steps for a logger that fails to power on.
LCD Readings Not Changing
Checks to perform if the LCD display readings remain static.
Battery and LED Indicators
Explains issues related to flashing 'Bat' and green LED indicators.
Computer Connection Issues
Addresses problems preventing the logger from connecting to the computer.
Water Damage
Guidance on handling accidental water exposure to the logger.
LCD Error Codes
Lists and explains common CO2 reading error codes (E01, E02, E03, E17).
Temperature Reading Errors
Explains air temperature error codes (E02, E03, E31) and their resolution.
Humidity Reading Errors
Explains relative humidity error codes (E04, E11, E34) and their resolution.
Warranty Information
Product Warranty
Details the one-year warranty against material and workmanship defects.
Warranty Exclusions
Lists damages not covered by the warranty, such as improper use or accidents.
Return Material Authorization
Procedure for obtaining an RMA number before returning a defective unit.
Declaration of Conformity
States compliance with relevant electrical equipment directives and standards.
Need help?
Do you have a question about the A160 and is the answer not in the manual?
Questions and answers