Advertisement
Quick Links
Advertisement
Related Manuals for Spectrum WatchDog A-Series
Summary of Contents for Spectrum WatchDog A-Series
- Page 1 ® A160 Temp/RH/CO Data Logger PRODUCT MANUAL Item # 3611A...
-
Page 2: Table Of Contents
Power Supply 100-240VAC adapter to 5VDC 500mA Dimensions (w/o A/C adapter) 4.75x4x4in (12x10.5x10.5cm) For customer support, or to place an order, call Spectrum Technologies at (800)248-8873 or (815)436-4440 between 7:30 am and 5:30 p.m. CST, FAX at (815)436-4460, or E-mail at info@specmeters.com. -
Page 3: Description
Thank you for purchasing a WatchDog Model A160 A-Series Data Logger. This manual describes how to use your WatchDog Logger and keep it working accurately for many years. Read this manual thoroughly in order to get effective performance from your data logger. The A160 logger also has a comprehensive LCD display with controls. -
Page 4: Installation And Operation
Control Buttons Installation and Operation Power On/Off Plug in the adaptor and the meter turns on automatically with a short beep, then displays current CO , temperature, and humidity readings on the LCD. Taking a Measurement The meter measures continuously and updates the LCD every second. - Page 5 maximum readings. Press and hold “RESET” for at least 1 sec- ond to reset the minimum and maximum values. Alarm An audible alarm can sound when CO concentration exceeds user-set limits. It beeps and the fan icon displays on the LCD when the CO level goes over the upper limit.
- Page 6 P3.0 screen. Press SET to enter “P3.1” to set the real time clock. The year will be blinking. Press “LOG ” or “MIN/MAX ” to set the year. Press the SET button to save the setting, or ESC to exit without saving. Repeat for (P3.2) month, (P3.3) day, (P3.4) 12/24 hour, (P3.5) hour, and (P3.6) minute.
-
Page 7: Connecting To The Computer
Connecting to the Computer NOTE: The A160 logger requires SpecWare version 9.03 or above. If you are already running a version of SpecWare 9, an update to the latest version is available as a free download SpecWare update page www.specmeters.com. The A160 and other A-Series loggers do not use the standard gray PC interface cable that accompanies SpecWare Software. -
Page 8: Specware Software
SpecWare Software SpecWare software version 9.03, and above support the WatchDog A160 logger. Previous builds of SpecWare 9 can be updated via the free downloads available at www.specmeters.com. The software ver- sion can be checked by selecting “About SpecWare” from the Help menu. - Page 9 SpecWare toolbar. Select the logging interval (ranging from 1 to 120 minutes), and ensure all channels are enabled before clicking “Ok” to launch the logger. IMPORTANT! The A160 does not begin logging until you press and hold the “LOG” button for two seconds. The LCD will alternate between “rEC”...
-
Page 10: Trouble Shooting
Trouble Shooting The A160 logger will not power on. 1. Check that the AC adapter is plugged in to an outlet and the A160. 2. Use a paper clip or toothpick to press “reset” on the base of the logger. The readings on the LCD don’t change. - Page 11 The download of logged data has successfully completed. Press and hold the “ESC” button for two seconds to return to the normal display. (alternating with the CO value) The A160 is logging data. If you want to stop logging, press and hold the “ESC” but- ton for two seconds.
-
Page 12: Warranty
This product is warranted to be free from defects in material or work- manship for one year from the date of purchase. During the warranty period Spectrum will, at its option, either repair or replace products that prove to be defective. This warranty does not cover damage due to...