Refrigerator Features; Door Storage - Viking DDFF136SS Use & Care Manual

Designer freestanding french door bottom-mount refrigerator/freezer
Hide thumbs Also See for DDFF136SS:
Table of Contents

Advertisement

Refrigerator Features

Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.
Shelves
To Remove a Shelf:
• Slightly tilt up the front and lift up the rear of the shelf, then pull
the shelf straight out.
To Lock the Shelf Into Another Position:
• Tilt up the front edge of the shelf.
• Insert the hooks into the desired frame openings and let the shelf
settle into place.
• Be sure the shelf is securely locked at the rear.
The Produce Drawer Top serves as the lower fresh food shelf.
To Remove the Produce Drawer Top:
• Remove produce drawers as indicated on page 11.
• Place hand under the frame to push up the glass. Lift glass out.
• Lift frame from refrigerator liner rails.
• To install, repeat above instructions in reverse order.
10
Refrigerator Features

Door Storage

Dairy Compartment
The Dairy Compartment provides convenient door storage for
spreadable items such as butter and margarine. This compartment
can be moved to different locations to accommodate storage
needs. To use the dairy compartment, raise the cover.
To Remove:
• Raise the cover, pull upward and tilt out.
To Install:
• Reverse above procedure.
Door Bins
Door Bins can be moved to meet storage needs.
To Remove:
• Slide bin up and pull straight out.
To Install:
• Slide bin in and down until firmly seated in the door liner.
Moisture Adjustable Produce Drawers
The Produce Drawers provide a higher humidity environment for fresh fruit and vegetable
storage.
Controls
The Produce controls regulate the amount of moisture in the drawer. Slide the control towards
the LOW setting when storing produce with outer skins. Slide the control towards the HIGH
setting when storing leafy produce.
To Remove:
• Pull drawer out to full extension. Tilt up front of drawer and pull straight out.
To Install:
• Insert drawer into frame rails and push back into place.
NOTE: For best results, keep the Produce Drawers tightly closed.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents