Related Manuals for Kubota M7151
Summarization of Contents
Operator's Manual and Tractor Identification
Kubota Tractor Models
Lists the tractor models covered in the manual.
Foreword and Safety Introduction
Safety First Principles
Emphasizes the importance of safety warnings and symbols throughout the manual.
Safe Operation Guidelines
Before Operating the Tractor
Covers essential pre-operation checks and safety precautions for safe tractor use.
Tractor Operation Procedures
Starting the Engine Safely
Details the correct and safe procedure for starting the tractor's engine.
Working Safely with the Tractor
Provides critical safety rules and best practices for operating the tractor during work.
Safe Operation on Slopes and Roads
Safe Operation on Slopes
Offers guidance on safe practices and hazards associated with operating on slopes.
Safe Driving on the Road
Outlines safety rules and considerations for road travel with the tractor.
Tractor Operational Safety Procedures
Parking the Tractor Safely
Explains the correct procedure for safely parking the tractor, including safety precautions.
Safe Operation of the PTO
Details the safe operation procedures for the Power Take-Off (PTO) system.
Tractor Operation and Implement Attachment
Using the 3-Point Hitch System
Guides on the proper attachment and use of 3-point hitch implements.
Tractor Servicing Safety
Covers essential safety guidelines and procedures for servicing the tractor.
Tractor Servicing and Warranty Information
Servicing of Tractor
Information on accessing dealership services and recording tractor serial numbers.
Warranty Terms and Conditions
Details the KUBOTA Limited Express Warranty terms and conditions.
Tractor Technical Specifications
Tractor Specification Table
Provides detailed technical specifications for various tractor models.
Tractor System Specifications
Traveling System Specifications
Details specifications related to the tractor's traveling system, including transmission and steering.
Hydraulic Unit Specifications
Outlines the specifications for the tractor's hydraulic system components.
Tractor PTO Specifications
PTO System Specifications
Provides specific technical details regarding the Power Take-Off (PTO) system.
Tractor Traveling Speed Specifications
Traveling Speeds Chart
Lists the traveling speeds for standard, premium, and KVT models across different gear shifts.
Implement Compatibility and Limitations
Implement Limitations
Defines maximum specifications and guidelines for using implements with the tractor.
Implement Limitations and Trailer Capacity
Trailer Load Capacity Guidelines
Specifies the maximum permissible load capacities for trailers based on tractor configuration.
Front Loader Installation and Specifications
Front Loader Installation Details
Details fixation points, size, and tightening torque for front loader installation.
Instrument Panel and Controls Overview
Instrument Panel and Controls Identification
Identifies and describes the main components of the tractor's instrument panel and controls.
Tractor Indicators and Gauges
Instrument Panel Indicator Lights
Explains the meaning and color coding of various indicator lights on the instrument panel.
Tractor Foot and Hand Controls
Foot and Hand Controls Identification
Identifies and locates all foot and hand operated controls on the tractor.
INTELLIPANEL(TM) Control System Overview
K-MONITOR System Operation (Part 1)
Covers the handling and operation of the main menu of the K-Monitor system.
INTELLIPANEL(TM) Display Features
Liquid Crystal Display (LCD) Information
Explains the information displayed on the LCD screen and its customization options.
INTELLIPANEL(TM) Control Setup Procedures
Initial Setup Procedures
Details the steps for initial setup, including clock and implement range settings.
INTELLIPANEL(TM) Transmission Settings
Power Shift Transmission Settings
Guides on configuring the automatic power shift transmission modes and settings.
INTELLIPANEL(TM) Measurement and Monitoring
Distance Measuring Functionality
Explains how to use the distance measuring feature for tracking travel.
INTELLIPANEL(TM) Information Displays
Basic Information Monitor Usage
Describes how to select and display essential operating information on the LCD screen.
INTELLIPANEL(TM) Data Recording and Management
Operating Conditions Monitoring System
Explains how the tractor records and displays various operating conditions and data.
K-MONITOR System Operation (Part 2)
K-MONITOR (Part 2) System Overview
Introduces the K-Monitor's sub-menu functions, including camera and data management.
K-MONITOR (Part 2) Outline
Provides an overview of the K-Monitor's sub-menu capabilities.
K-MONITOR System Interface Details
K-MONITOR Parts Identification
Identifies and describes the parts and functions of the K-MONITOR screen and controls.
K-MONITOR Data Management
Data Import and Export Procedures
Details the process for importing and exporting data using a USB memory stick.
Screenshot Functionality
Explains how to capture and export screen images from the K-MONITOR.
K-MONITOR Troubleshooting Information
Failure Messages Display and Interpretation
Explains how to check and interpret failure messages (DM1 and DM2) shown on the K-MONITOR.
Pre-Operation Checks and Inspections
Daily Checks Checklist
Lists essential daily inspection items to ensure safe and proper tractor operation.
Service Inspect Indicator Function
Explains the function of the service inspect indicator and its role in maintenance reminders.
Pre-Operation Maintenance Procedures
Checking Maintenance Interval Items
Guides on how to check items that have reached their maintenance interval.
Maintenance Interval Resetting Procedure
Details the procedure for resetting maintenance intervals after service is performed.
Engine Operation and Aftertreatment Systems
Safe Engine Operation Guidelines
Covers essential safety precautions and warnings related to engine operation.
Dual Exhaust Aftertreatment Systems Explained
Explains the function of the DPF and SCR systems in exhaust gas purification.
Engine Exhaust Aftertreatment System Details
Diesel Particulate Filter (DPF) Muffler
Details the DPF system's function, handling points, and fuel/oil requirements.
DPF Regeneration Process Modes
Explains the different modes (Auto, Inhibit) for DPF regeneration and their procedures.
DPF Regeneration Mode Operations
Auto Regeneration Mode Procedure
Provides step-by-step instructions for operating the tractor in Auto Regeneration mode.
DPF Regeneration Warning Level Procedures
PM Warning Level Procedures (Auto Mode)
Details the procedures required for different PM warning levels in Auto Regeneration mode.
DPF Regeneration Inhibit Mode Operation
Regeneration Inhibit Mode Procedure
Guides on using the Regeneration Inhibit mode and related procedures.
DPF Parked Regeneration Procedure
Parked Regeneration Procedure Steps
Step-by-step guide for performing parked regeneration of the DPF.
DPF Regeneration Tips and SCR System
Tips for Diesel Particulate Filter (DPF) Regeneration
Offers advice for optimizing DPF regeneration and avoiding issues.
Selective Catalytic Reduction (SCR) Muffler
Explains the function and components of the SCR system and DEF/AdBlue.
SCR System Monitoring and Warnings
SCR System Inducement Display on LCD
Describes how SCR system status and warnings are displayed on the LCD.
DEF/AdBlue Warning Indications and Countermeasures
Details DEF/AdBlue warnings and recommended countermeasures.
Engine Starting and DEF/AdBlue Handling
Storing and Handling DEF/AdBlue Solution
Provides guidelines for safely storing and handling DEF/AdBlue solution, especially in cold weather.
Engine Starting Procedure
Covers the essential steps and precautions for starting the tractor's engine.
Engine Starting and Control System Operations
Battery Switch Operation
Explains the function and operation of the battery switch for starting and storage.
Parking Brake System Operation
Details the correct procedure for applying and releasing the tractor's parking brake.
Key Switch Functions and Operation
Describes the different positions and functions of the tractor's key switch.
Engine Speed and Memory Settings
Rev-limiter Control Setting
Guides on setting the engine rev-limiter to prevent over-speeding and potential damage.
RPM Dual Memory Setting Function
Explains how to set and use dual engine RPM memory for efficient operation.
Engine Operation in Cold Weather Conditions
Cold Weather Engine Starting Procedure
Provides specific steps for starting the engine in cold weather conditions.
Engine Low Temperature Regulation System
Details the engine's automatic low-temperature regulation system to prevent damage.
Engine Operation and DEF/AdBlue Warnings
DEF/AdBlue Freeze Warning and Action
Describes the warning for DEF/AdBlue freezing and the necessary actions.
Engine Stopping Procedure
Outlines the correct procedure for safely shutting down the tractor's engine.
Engine and Transmission Warm-up Procedures
Engine Warming Up Process
Explains the importance and procedure for warming up the engine before operation.
Transmission Low Temperature Regulation
Details the transmission's low-temperature regulation system to prevent damage.
Engine Starting and Battery Procedures
Jump Starting the Engine Safely
Provides safety guidelines and procedures for jump-starting the tractor's engine.
Tractor Operation Basics and Break-in
Operating a New Tractor: Initial Precautions
Covers essential precautions for breaking in a new tractor to ensure longevity.
Break-in Period Critical Precautions
Highlights crucial steps to avoid during the first 50 operating hours for proper break-in.
Tractor Entry and Operator Controls
Safely Boarding and Leaving the Tractor
Provides instructions for safely mounting and dismounting the tractor.
Operator's Position Controls Adjustment
Focuses on adjusting the seat and suspension for optimal posture and vibration reduction.
Operator Controls and Safety Features
Operator's Seat Adjustment Guide
Details how to adjust the operator's seat for travel, weight, and comfort.
Seat Belt Usage and Safety Importance
Emphasizes the critical importance of using the seat belt when ROPS or CAB is installed.
Instructional Seat Usage Guidelines
Explains the intended use and limitations of the instructional seat.
Operator Controls and Steering Adjustment
Instructional Seat Safety Precautions
Lists specific precautions and conditions for using the instructional seat safely.
Steering Wheel Adjustment for Comfort
Guides on adjusting the steering wheel for optimal driving position and comfort.
Operator Controls and Lighting Systems
Extendable Mirror Adjustment
Instructions for adjusting the length and angle of the extendable mirrors.
Heater Mirror Defogger Function
Explains how to activate the defogger function for the heated mirrors.
Light Controls Overview
Introduces the various lighting controls for the tractor.
Tractor Headlight Operations
Headlight Beam Selection and Operation
Details how to operate the headlights, including beam selection and indicators.
Tractor Lighting and Signaling Systems
Turn Signal and Hazard Light Switch
Explains the operation of turn signals and hazard lights, including indicators.
Trailer Connector Signal Integration
Describes how trailer indicators function when connected to the tractor.
Horn Button Operation
Explains how to use the tractor's horn.
Tractor Lighting Controls - Work and Beacon
Work Light Switch Operation
Details how to operate the front and rear work lights, including safety warnings.
Beacon Light Switch Operation
Explains how to activate and deactivate the beacon light.
Tractor Brake Control System
Brake Pedal Operation and Safety
Covers the operation of brake pedals, interlocking, and safety warnings related to braking.
4WD Braking System Features
Explains the integrated braking characteristics of the 4WD system and safety considerations.
Tractor Braking Systems and Trailer Brakes
Parking Brake System Operation
Details the operation and warning indicators of the parking brake.
Hydraulic Trailer Brake System
Explains the function and benefits of the hydraulic trailer brake system.
Pneumatic Trailer Brake System
Describes the pneumatic trailer brake system and connection procedures.
Tractor Travel Control Systems
Clutch Pedal Operation and Safety
Covers the operation of the clutch pedal and safety warnings to prevent injury.
Tractor Travel Controls Operation
Hand Throttle Operation Guide
Explains how to use the hand throttle to control engine speed and its interaction with the rev-limiter.
Foot Throttle Operation Guide
Details the use of the foot throttle for speed control, especially on roads, and its interlock with the hand throttle.
Shuttle Lever Operation and Safety
Provides critical safety warnings and operational guidance for the shuttle lever.
Transmission Shuttling Control Features
Shuttle Button Functionality
Explains how to use the shuttle button as an alternative to the shuttle lever for forward/reverse travel.
Transmission Neutral and Creep Modes
Shuttle Neutral Button Usage
Describes how to use the shuttle neutral button to return the transmission to neutral.
Creep Gear Shift Lever Operation
Guides on operating the creep gear shift lever and its applicable jobs.
Tractor Drive System Controls
4WD and Auto 4WD Switch Operation
Explains the selection and operation of 2WD, 4WD, and Auto 4WD modes.
Tractor Drive System Mode Selection
Switching 4WD Modes
Details how to switch between AUTO 4WD, Manual 4WD, and 2WD modes.
Tractor Drive System - Differential Lock
Differential Lock System Overview
Explains the differential lock system, selection modes, and safety warnings.
Differential Lock Mode Selection
Switching Differential Lock Modes
Guides on switching between AUTO, Manual, and OFF modes for the differential lock.
Power Shift Transmission Control System
Power Shift Transmission System Overview
Introduces the electronic 24-speed transmission and its operational modes.
Switching Operation Modes
Explains how to switch between Manual, Auto Shift (Road), and Auto Shift (Field) modes.
Power Shift Transmission Mode Selection
Switching Auto Shift Modes
Details how to switch between Road and Field modes for auto shift operation.
Power Shift Transmission Traveling Speeds
Setting Traveling Speeds
Guides on setting the desired traveling speed ranges for automatic gear shifting.
Power Shift Transmission Field Mode Settings
Setting Main Gear Shift Range (Field Mode)
Explains how to set the main gear shift range for optimal performance in field mode.
Setting Range Gear Shift (Field Mode)
Guides on setting the range gear shift for optimal working speeds in field mode.
Power Shift Transmission Road Mode Settings
Setting Traveling Speed Range (Road Mode)
Details setting the traveling speed range for automatic shifting in road mode.
Setting Main Gear Shift Range (Field Mode)
Guides on setting the main gear shift range for optimal performance in field mode.
Power Shift Transmission Advanced Modes
Setting Range Gear Shift in Field Mode
Explains how to set the range gear shift for optimal working speeds in field mode.
Operating in Manual Transmission Mode
Covers the procedure for switching to and operating the tractor in manual transmission mode.
Power Shift Transmission Combined Mode Operation
Combined Auto Shift-Manual Mode Operation
Details how to combine auto shift and manual modes for efficient operation.
Power Shift Transmission Sensitivity Settings
Setting Auto Shift Sensitivity
Guides on adjusting auto shift sensitivity for eco-friendly or power-required operation.
CVT (Continuously Variable Transmission) Control
CVT Control System Overview
Introduces the CVT system, its modes, and other configurable settings.
CVT Transmission Operation
Traveling Operation with CVT
Explains how to control traveling speed using the ez-command center or foot throttle.
CVT Transmission Speed Adjustments
Modifying Maximum Traveling Speed
Guides on adjusting the maximum traveling speed settings for the CVT.
CVT Transmission Modes of Operation
Automatic Mode Operation
Details the operation of the automatic mode for traveling and towing implements.
Manual Engine Speed Setting Mode
Explains the manual mode for PTO-driven implements, optimizing engine power and speed.
CVT Transmission Sensitivity and Response
Setting CVT Sensitivity
Guides on adjusting CVT sensitivity for different work conditions and job types.
Setting CVT Response Characteristics
Explains how to adjust the CVT response for improved start/stop and sensitivity.
Tractor Cruise Control System
Cruise Control Setup and Operation
Covers setting and activating cruise control using the ez-command center or foot throttle.
Tractor Special Control Features
Ratio Lock Button Functionality
Explains the function of the ratio lock button for preventing transmission shift-downs on slopes.
Limp Home Switch Operation
Details the emergency limp home function for moving the tractor in case of transmission trouble.
Tractor Stopping and Driving Checks
Engine Overspeed Limiting Indicator
Explains the engine overspeed warning indicator and buzzer.
Gear Shifting Warning Indicator
Details the gear shifting warning indicator and buzzer for improper shifting.
Immediately Stop Engine Conditions
Lists critical conditions requiring immediate engine shutdown for safety.
Tractor Diagnostic System - Easy Checker
Easy Checker(TM) System Overview
Explains the function of the Easy Checker system for monitoring tractor status and warnings.
Tractor Gauges and Monitoring Systems
Fuel Gauge Operation
Explains how to read the fuel gauge and precautions for preventing fuel tank emptying.
DEF/AdBlue® Level Gauge
Describes the DEF/AdBlue® level indicator and its relation to engine output.
Pneumatic Pressure Gauge Usage
Explains how to check pneumatic pressure for the trailer brake system.
Tractor Monitoring Systems and Headland Management
Coolant Temperature Gauge Interpretation
Explains how to read the coolant temperature gauge and identify overheating.
Tachometer Functionality
Describes the tachometer's role in indicating engine speed.
Headland Management System Introduction
Introduces the Headland Management System for automated field operations.
Headland Management System Operation
What is Headland Management System?
Explains the purpose and benefits of the Headland Management System.
Programming the Headland Management System
Guides on setting up and programming the Headland Management System.
Headland Management System Handling
Handling the Headland Management System
Details how to operate and manage the Headland Management System.
Field In and Out Button Activation
Explains how to use the Field In and Field Out buttons to activate the system.
Front Suspension System Modes
Switching Front Suspension Modes
Guides on selecting and switching between Auto, Block, and Manual modes for front suspension.
Tractor Operating Modes and Parking
Reading Suspension Mode Indicators
Explains how to interpret the indicators for the front suspension modes.
Traveling Speed and Mode Selection
Details how Auto, Block, and Manual modes switch based on traveling speed.
Tractor Parking Procedure
Provides essential safety steps for parking the tractor, including brake application.
Tractor Operation Techniques and Safety
Operating the Tractor on Roads
Provides safety guidelines and precautions for operating the tractor on public roads.
Operating on Slopes and Rough Terrain
Offers critical safety advice for operating the tractor on slopes and uneven ground.
Tractor Operation Techniques and Safety
Transporting the Tractor Safely
Details instructions for safely transporting the tractor, including towing precautions.
Using the Power Steering System
Explains the operation and precautions for using the tractor's power steering.
Power Take-Off (PTO) Operation
PTO Operation Overview
Covers general safety precautions and procedures for operating the PTO.
PTO Clutch Control Switch
Explains how to engage and disengage the PTO clutch and related safety warnings.
PTO Operation Details
Displaying PTO RPM Information
Describes how front and rear PTO RPM are displayed on the instrument panel.
External Switch for Rear PTO
Explains the operation of the external switch for controlling the rear PTO.
PTO Operating Mode and Gear Shift Lever
Guides on selecting PTO operating modes and gear shifts according to implement and workload.
Front PTO Operation
Front PTO Operation Details
Explains the operation of the front PTO and its independence from the rear PTO.
PTO Clutch Control Switch Operation
Details how to engage and disengage the PTO clutch, including safety notes.
PTO System Indicators and Covers
PTO Clutch Indicator
Indicates when the PTO clutch is engaged.
Displaying PTO RPM
Describes how front and rear PTO RPM are shown on the K-monitor.
PTO Shaft Cover and Cap Maintenance
Covers the importance of keeping the PTO shaft cover and cap in place.
3-Point Hitch and Drawbar System
3-Point Hitch Components Overview
Identifies the main components of the 3-point hitch system.
3-Point Hitch Adjustments and Drawbar
Adjusting Lateral Float
Guides on adjusting lateral float for implement contour following.
Floating Mechanism Functionality
Explains the floating mechanism for allowing implement terrain following.
Selecting Top Link Mounting Holes
Guides on selecting the correct top link mounting holes based on hydraulic unit reference.
Drawbar Installation and Removal
Instructions for installing and removing the drawbar when needed.
3-Point Hitch Implement Attachment and Controls
Attaching and Detaching Implements Safely
Provides safety instructions for attaching and detaching implements to the 3-point hitch.
Remote Hitch UP/DOWN Switch Operation
Explains the operation of the remote hitch up/down switch for aligning implements.
Lifting Rod Adjustment and Safety
Guides on adjusting the lifting rod length and safety precautions.
3-Point Hitch Components and Stabilizers
Top Link Adjustment and Function
Details how to adjust the top link angle and its proper length.
Automatic Stabilizer Operation
Explains how the automatic stabilizer locks or swings the implement.
3-Point Hitch Adjustments and Quick Hitch
Adjusting Lower Link Width
Guides on adjusting the lower link width for proper implement fitment.
Quick Hitch (Hook Type) Installation
Details the installation and secure locking of a quick hitch.
Implement Attachment with Quick Hitch
Attaching Implement to Tractor with Quick Hitch
Provides steps for attaching implements using the quick hitch system.
Implement Detachment and Drawbar
Detaching Implement from Tractor
Details the procedure for safely detaching implements from the 3-point hitch.
Quick Hitch Locking Device Function
Explains how to use the lock bolt for securing the quick hitch.
Drawbar Operation and Safety
Covers drawbar usage and critical safety warnings related to pulling points.
Swing Drawbar Usage
Describes the different ways to assemble and use the swing drawbar.
High-Hitch System and Adjustment
High-Hitch Component Overview
Introduces the high-hitch component and its adjustment capabilities.
Adjusting the High-Hitch Level
Guides on adjusting the high-hitch height using its handle and lock pin.
High-Hitch with Trailer Coupling
High-hitch Automatic Trailer Coupling
Details the procedure for coupling a trailer using the high-hitch automatic system.
High-Hitch with Ball Trailer Coupling and Piton-Fix
High-hitch with Ball Trailer Coupling
Explains the use of a high-hitch with a ball trailer coupling.
Piton-Fix System Operation
Covers the operation and safety warnings for the Piton-Fix system.
Front 3-Point Hitch System
Front 3-Point Hitch System Outline
Introduces the front 3-point hitch system, its functions, and safety warnings.
Front 3-Point Hitch Lift Control
Lift Control Operation
Explains how to use the remote control valve lever/switch for raising, lowering, and floating the hitch.
Hydraulic Unit Overview and 3-Point Hitch Control
Hydraulic Unit Features
Lists key features of the tractor's hydraulic system.
3-Point Hitch Control System Terminology
Identifies and defines the components of the 3-point hitch control system.
3-Point Hitch Control Functions
3-Point Hitch Position Lock Operation
Explains how the position lock activates and how to release it.
Ride Control System Activation
Details the conditions required for ride control activation.
3-Point Hitch Control Mode Selection
Position/Mix Draft Mode Selection
Guides on selecting position or draft control based on work type.
3-Point Hitch Control Dial Functions
Depth Control Dial (Hydraulic Dial) Operation
Explains how to adjust implement height using the depth control dial.
Position Control Mode Operation
Describes how position control maintains implement depth regardless of pull.
3-Point Hitch Draft and Float Controls
Mix Draft Control Mode Explanation
Explains how mix draft control automatically adjusts implement pull based on load.
Float Control Procedure
Guides on placing the depth control dial in float position for ground contour following.
Lift Arm Top Limit Adjustment
Details how to adjust the top limit for the 3-point hitch.
3-Point Hitch Lowering Speed Adjustment
3-Point Hitch Lowering Speed Adjustment
Guides on adjusting the lowering speed for the 3-point hitch.
3-Point Hitch Quick Raise/Lower Switch
3-Point Quick Raise/Lower Switch Operation
Explains how to use the quick raise/lower switches for implement movement.
3-Point Hitch Position Lock and Ride Control
3-Point Hitch Position Lock Functionality
Explains how the position lock activates and how to release it.
Ride Control System Activation
Details the conditions required for ride control activation.
Auxiliary Hydraulic Systems
Auxiliary Hydraulics Overview
Lists key features of the tractor's auxiliary hydraulic system.
Power-beyond Type Hydraulic Outlet
Explains the function of the power-beyond hydraulic outlet for external implements.
Hydraulic Drain Port Function
Describes the purpose of the hydraulic drain port for oil return.
Remote Hydraulic Control System
Remote Hydraulic Control System Overview
Introduces the remote hydraulic control system and its capabilities.
Remote Control Valve Types and Operation
Details the types of remote control valves and their basic operation.
Hydraulic Unit - Flow Control and Levers
Flow Control Valve Adjustment
Guides on adjusting the flow rate for remote control valves and safety precautions.
Remote Control Valve Lever Operation
Explains how the remote control valve levers direct hydraulic oil flow.
Hydraulic Unit - Remote Valve Controls
Remote Valve Controls on Rear Fender
Describes the operation of remote control valve switches located on the rear fenders.
Hydraulic Oil Flow Principles
Explains hydraulic oil flow principles for single-acting and double-acting cylinders.
Hydraulic Unit - Remote Valve Lock and Settings
Remote Control Valve Lock Button
Explains how to lock and unlock remote control valves for safety.
Detailed Setting of Remote Control Valves
Guides on presetting and confirming settings for all remote control valves.
Hydraulic Unit - Remote Valve Switches
Remote Control Valve Switch Operation
Explains how remote control valve switches direct hydraulic oil flow.
Hydraulic Unit - Joystick Control
Joystick for Remote Control Valve and Loader
Details how to operate loader and remote control valves using the joystick.
Tires, Wheels, and Ballast
Tire Information and Inflation
Provides information on tire sizes, inflation pressure, and safety precautions.
Wheel and Tire Maintenance
Safe Wheel Replacement Procedures
Outlines precautions for safely removing and replacing tractor wheels.
Wheel and Tire Adjustments
Wheel Adjustment Procedures
Guides on adjusting rear wheel tread width for stability and clearance.
Rear Wheels with Bar Type Axle
Details tread width adjustment for rear wheels on bar type axles.
Tire and Axle Configurations
Dual Tires (if equipped)
Explains the purpose and usage of dual wheels on rear axles.
Bar Type Axle Configuration
Describes the attachment of wheels to the rear axle.
Flange Type Axle Configuration
Details the use of flange adapters for dual tires.
Tractor Ballast and Weighting
Ballast Importance and Safety
Explains the need for ballast for stability and traction, with safety warnings.
Front Ballast Options
Details adding front weights for stability and traction, with safety notes.
Tractor Ballast and Weighting Details
Rear Ballast for Single Tires
Guides on adding weight to rear wheels for traction or stability.
Monolithic Block Ballast Option
Explains the use of a monolithic block for front or rear ballast.
Cab Operation and Door/Window Controls
Door Locking and Unlocking
Provides instructions for locking and unlocking the tractor cab doors.
Opening the Tractor Door
Details how to open the tractor cab doors from inside and outside.
Cab Features and Safety Exits
Rear Window Operation
Explains how to open and close the rear window of the tractor cab.
Sun Roof Functionality
Describes how to operate the sun roof for ventilation.
Emergency Exit Procedures
Outlines procedures for emergency exit from the cab.
Dome Light Operation
Explains the operation of the cab's dome light and its power consumption.
Cab Features - Wiper System
Front Wiper and Washer Switch
Details the operation of the front wiper and washer system.
Rear Wiper and Washer Switch
Explains the operation of the rear wiper and washer system.
Using Wipers in Cold Season
Provides guidance on using wipers safely during cold weather conditions.
Cab Air Conditioning System
Airflow and Air Control Vents
Explains how to adjust airflow and control vents for desired cabin comfort.
Dashboard Air Outlet Adjustment
Details the independent adjustment of dashboard air outlets.
Rear Air Outlet Operation
Describes the function of the rear air outlet for enhanced cabin cooling.
Cab Control Panel Functions
Cab Control Panel Overview
Identifies and describes the functions of the cab's control panel.
Mode Switch Operation
Explains how to set the mode switch for different air delivery options.
Temperature Control Dial Usage
Guides on adjusting the temperature control dial for optimal air temperature.
Cab Air Conditioning Operation
Air Conditioning Operation Modes
Details the operation of the air conditioning system, including blower and AC switch.
Heating and Recirculation Settings
Explains the procedure for heating the cab and using recirculation settings.
Cab Air Conditioning Cooling and Defrosting
Cooling or Dehumidifying-Heating Operation
Details the procedure for cooling or dehumidifying the cab.
Defrosting or Demisting the Windshield
Provides steps for defrosting or demisting the windshield using the air conditioning system.
Cab Accessories and Connectivity
Accessory Electrical Outlets
Describes the available electrical outlets for accessories in the cab.
Trailer Electrical Outlet Function
Explains the function and terminal layout of the trailer electrical outlet.
Cab Accessories - Communication and Power
ISOBUS Socket Connection
Explains how to connect implements using the ISO Standard 11783 ISOBUS socket.
Electrical Outlet Socket Specifications
Details the specifications and terminals for electrical outlet sockets.
Cab Accessories - Data and Signal Sockets
ISOBUS Monitor Socket Functionality
Describes the use of the ISOBUS monitor socket for implement monitoring.
Signal Socket (ISO Standard 11786)
Explains the signals transmitted from the tractor to implements via the ISO Standard 11786 socket.
Cab Interior Features and Installation
Glove Box Operation
Explains how to use the glove box.
Cigarette Lighter and Ashtray
Details the operation of the cigarette lighter and the ashtray.
Installing the Implement Control Box
Provides instructions for installing the implement control box in the cab.
Cab Exterior Feature - Beacon Light
Beacon Light Switch Operation
Explains how to activate and deactivate the beacon light.
Maintenance Schedule and Intervals
Service Intervals Overview
Provides a comprehensive list of maintenance tasks and their recommended service intervals.
Maintenance Schedule - Lubricants and Fluids
Lubricants, Fuel, and Coolant Information
Details the types and quantities of lubricants, fuel, and coolant required for maintenance.
Maintenance Schedule - Items Chart
Maintenance Items At-a-Glance Chart
Provides a summary chart of maintenance items based on tractor hour meter readings.
Periodic Service - Daily Checks
Hood Opening Procedure
Provides instructions on how to safely open and close the tractor hood.
Side Cover Removal Procedure
Details how to remove the side cover for access to components.
Periodic Service - Daily Inspection
Daily Checks Checklist
Lists essential daily inspection items to ensure safe and proper tractor operation.
Periodic Service - Fluid Level Inspections
Inspecting DEF/AdBlue® Level and Adding Fluid
Provides instructions for checking the DEF/AdBlue® level and refilling the tank.
Periodic Service - System Checks
Checking Pneumatic Brake Pressure
Details how to check the pneumatic pressure in the trailer brake air tank.
Checking the Water Separator
Explains how to check and drain water from the water separator.
Periodic Service - Fluid Level Checks
Checking Engine Oil Level
Provides instructions for checking the engine oil level and adding oil if necessary.
Periodic Service - Fluid Level Checks
Checking Transmission Fluid Level
Guides on checking the transmission fluid level under specific conditions.
Checking Coolant Level
Provides instructions for checking the coolant level and adding coolant.
Periodic Service - Cleaning Components
Cleaning Grill, Radiator, and Cooler
Details the procedure for cleaning the cooling system components to prevent overheating.
Periodic Service - Component Checks
Checking DPF/SCR Muffler System
Guides on checking the DPF/SCR muffler for proper function and safety.
Checking Brake Pedal Operation
Instructs on inspecting brake pedals for free travel and smooth operation.
Checking Parking Brake System
Details how to check the parking brake and its warning indicator.
Periodic Service - System Checks
Checking Gauges, Meters, and Easy Checker
Instructs on inspecting instrument panel gauges, meters, and the Easy Checker system.
Checking Lights and Signals
Guides on inspecting headlights, turn signals, and hazard lights for proper function.
Checking Seat Belt Condition
Emphasizes the importance of checking the seat belt and its mounting hardware.
Checking Movable Parts for Smooth Operation
Advises on checking movable parts and applying lubrication if needed.
Initial Service Intervals (5, 10, 25, 50 Hours)
Initial Service Intervals Overview
Lists initial service tasks required after the first 5, 10, 25, and 50 operating hours.
Tightening Bar Axle Torque
Details the procedure for tightening bar axle bolts to the specified torque.
Initial Service Interval (50 Hours)
Initial 50 Hours Service Checks
Lists essential servicing tasks to be performed after the first 50 operating hours.
Checking Engine Oil Level
Provides instructions for checking the engine oil level.
Initial Service Interval (50 Hours) and 50 Hour Service
Replacing Engine Oil Filter
Guides on replacing the engine oil filter and related safety precautions.
Checking Fan Belt Tension
Details how to check the fan belt tension and replace if necessary.
Replacing Transmission Oil Filter
Provides instructions for replacing the transmission oil filter.
50 Hour Service Interval
Lists maintenance tasks to be performed every 50 operating hours.
Checking Neutral Circuit Functionality
Details how to check if the neutral circuit is functioning correctly.
Periodic Service Intervals (500 Hours)
Initial 500 Hours Service Interval
Lists maintenance tasks required after the first 500 operating hours.
Changing Transmission Fluid Procedure
Provides step-by-step instructions for changing the transmission fluid.
Periodic Service Intervals (500 Hours)
Changing Rear Axle Case Oil
Guides on changing the oil in the rear axle case.
Replacing Transmission Oil Filter
Details the procedure for replacing the transmission oil filter.
Every 500 Hours Service Interval
Lists maintenance tasks to be performed every 500 operating hours.
Changing Engine Oil Procedure
Provides step-by-step instructions for changing the engine oil.
Periodic Service - Engine Oil Filter Replacement
Replacing Engine Oil Filter
Guides on replacing the engine oil filter and related safety precautions.
Periodic Service - Fuel System Maintenance
Cleaning Pre-Fuel Filter Element
Details the procedure for cleaning the pre-fuel filter element.
Replacing Fuel Filter
Provides instructions for replacing the fuel filter.
200 Hours Service Interval
Lists maintenance tasks to be performed every 200 operating hours.
Draining Fuel Tank Water
Explains how to drain water and sediment from the fuel tank.
Periodic Service - Air Filter and Toe-in
Adjusting Front Wheel Toe-in
Guides on adjusting the toe-in measurement for the front wheels.
Cleaning Inner Air Filter
Details the procedure for cleaning the inner air filter.
Periodic Service - Air Filter Cleaning
Cleaning Fresh Air Filter
Provides instructions for cleaning the fresh air filter.
Periodic Service - Belt Checks and Replacements
400 Hours Service Interval
Lists maintenance tasks to be performed every 400 operating hours.
Checking Fan Belt Tension
Details how to check the fan belt tension and replace if necessary.
Periodic Service - Water Separator and Belts
Cleaning the Water Separator
Explains the procedure for cleaning the water separator.
Periodic Service - Fuel System and Initial Intervals
Cleaning Fuel Solenoid Pump Element
Details the procedure for cleaning the fuel solenoid pump element.
Initial 500 Hours Service Interval
Lists maintenance tasks required after the first 500 operating hours.
Periodic Service Intervals (500 Hours)
Every 500 Hours Service Interval
Lists maintenance tasks to be performed every 500 operating hours.
Changing Engine Oil Procedure
Provides step-by-step instructions for changing the engine oil.
Replacing Engine Oil Filter Procedure
Guides on replacing the engine oil filter and related safety precautions.
Periodic Service - Engine and Fuel Filter Replacement
Cleaning Pre-Fuel Filter Element
Details the procedure for cleaning the pre-fuel filter element.
Replacing Fuel Filter Procedure
Provides instructions for replacing the fuel filter.
Periodic Service - Hydraulic Filter Replacement (Suction)
Replacing Hydraulic Oil Filter (Suction)
Guides on replacing the hydraulic oil filter (suction side).
Periodic Service - Hydraulic Filter Replacement (Return)
Replacing Hydraulic Oil Filter (Return)
Provides instructions for replacing the hydraulic oil filter (return side).
Periodic Service - Power Steering and Cooling System
Replacing Power Steering Oil Filter
Guides on replacing the power steering oil filter.
Periodic Service - Cooling System Checks
Checking Radiator Hose and Clamp Condition
Instructs on checking radiator hoses and clamps for proper fit and condition.
Periodic Service - Fluid Line Checks
Checking Fuel Line Integrity
Guides on checking fuel lines and hose clamps for tightness and damage.
Checking Intake Air Line Condition
Instructs on checking intake air lines and hose clamps for tightness and damage.
Checking Brake Hose Condition
Advises consulting dealer for checking brake hose condition.
Checking Differential Lock Hose Condition
Guides on checking differential lock hoses and hose clamps for tightness and damage.
Periodic Service - Hydraulic Line Checks
Checking Lift Cylinder Hose Condition
Instructs on checking lift cylinder hoses and hose clamps for tightness and damage.
Checking Power Steering Line Condition
Guides on checking power steering lines and hose clamps for tightness and damage.
Checking Oil Cooler Line Condition
Instructs on checking oil cooler lines and hose clamps for tightness and damage.
Checking Front Suspension Hose Condition
Guides on checking front suspension hoses and hose clamps for tightness and damage.
Periodic Service - Air Conditioner System Checks
Checking Air Conditioner Pipe and Hose
Guides on checking air conditioner pipes and hoses for tightness and damage.
Checking Air Conditioner Drive Belt Tension
Details how to check the drive belt tension and replace if necessary.
Periodic Service - PTO Oil and 200 Hour Tasks
Changing Front PTO Oil Procedure
Provides instructions for changing the front PTO oil.
200 Hours Service Interval Tasks
Lists maintenance tasks to be performed every 200 operating hours.
Periodic Service - Transmission Fluid and Oil
1000 Hours Service Interval Tasks
Lists maintenance tasks to be performed every 1000 operating hours.
Changing Transmission Fluid Procedure
Provides step-by-step instructions for changing the transmission fluid.
Periodic Service - Transmission Filter Replacement
Replacing Transmission Oil Filter
Details the procedure for replacing the transmission oil filter.
Periodic Service - Axle and Gear Case Oil Changes
Changing Rear Axle Case Oil
Guides on changing the oil in the rear axle case.
Changing Front Differential Case Oil
Provides instructions for changing the front differential case oil.
Periodic Service - Front Axle and Engine Valve Clearance
Changing Front Axle Gear Case Oil
Guides on changing the oil in the front axle gear case.
Adjusting Engine Valve Clearance
Advises consulting dealer for adjusting engine valve clearance.
1000 Hours or 1 Year Service Interval
Lists servicing tasks for 1000 hours or 1 year, whichever comes first.
Periodic Service - Air Cleaner and Exhaust
Replacing Air Cleaner Primary and Secondary Elements
Guides on replacing the air cleaner elements.
Checking Exhaust Manifold Condition
Advises consulting dealer for checking the exhaust manifold.
1500 Hours Service Interval Tasks
Lists maintenance tasks to be performed every 1500 hours.
Periodic Service - Fuel Injector and DEF/AdBlue Checks
Cleaning Fuel Injector Nozzle Tip
Advises consulting dealer for cleaning the fuel injector nozzle tip.
Checking DEF/AdBlue® Injector Tip
Advises consulting dealer for checking the DEF/AdBlue® injector tip.
Checking DEF/AdBlue® Line Connections
Guides on checking DEF/AdBlue® lines for secure connection and damage.
Periodic Service - DPF and CAB Checks
Replacing DPF Differential Pressure Sensor Hose
Advises consulting dealer for replacing the DPF differential pressure sensor hose.
Replacing Boost Sensor Hose
Advises consulting dealer for replacing the boost sensor hose.
Checking CAB Isolation Cushion
Instructs on checking CAB isolation cushions for damage and replacing if needed.
Periodic Service - Parking Brake and 4-Year Tasks
Replacing Parking Brake Cable
Advises consulting dealer for replacing the parking brake cable.
4 Years Service Interval Tasks
Lists maintenance tasks to be performed every 4 years.
Periodic Service - Hose Replacements (4 Years)
Replacing Radiator Hose (Water pipes)
Guides on replacing radiator hoses and clamps.
Replacing Fuel Hose
Advises consulting dealer for replacing the fuel hose.
Replacing Intake Air Line
Advises consulting dealer for replacing the intake air line.
Replacing Oil Separator Hose
Advises consulting dealer for replacing the oil separator hose.
Replacing Oil Cooler Line
Advises consulting dealer for replacing the oil cooler line.
Replacing Power Steering Hose
Advises consulting dealer for replacing the power steering hose.
Replacing Lift Cylinder Hose
Advises consulting dealer for replacing the lift cylinder hose.
Replacing Suspension Hose (Front suspension type)
Advises consulting dealer for replacing front suspension hoses.
Replacing Differential Lock Hose
Advises consulting dealer for replacing the differential lock hose.
Replacing Brake Hose
Advises consulting dealer for replacing the brake hose.
Replacing Air Conditioner Hose
Advises consulting dealer for replacing the air conditioner hose.
Service Procedures As Required
Bleeding the Fuel System
Provides instructions for bleeding the fuel system after component removal or fuel draining.
Service Procedures As Required
Bleeding the Brake System
Advises consulting dealer for bleeding the brake system.
Replacing Fuses
Guides on replacing tractor fuses, including safety precautions and troubleshooting.
Protected Electrical Circuits and Fuses
Protected Electrical Circuits Overview
Lists the protected circuits and their corresponding fuse capacities.
Replacing Light Bulbs
Replacing Light Bulbs
Provides instructions for replacing various light bulbs, including safety precautions.
Periodic Service - Headlamp and Lubrication
Replacing Head Lamp Bulb
Guides on replacing the headlamp bulb with safety warnings.
Lubricating Points
Identifies key lubrication points on the tractor.
Adding Washer Liquid
Explains how to add washer liquid to the reservoir.
Periodic Service - Refrigerant and Washing
Checking Refrigerant (gas) Amount
Details how to check the refrigerant level and safety precautions.
Washing the Tractor Safely
Provides instructions for safely washing the tractor, including pressure washer guidelines.
Storage Procedures for Tractor
Tractor Storage Guidelines
Covers essential procedures for storing the tractor for extended periods.
Removing Tractor from Storage
Details the steps required to prepare the tractor for operation after storage.
Troubleshooting - Electric Controller Issues
Electric Controller Troubleshooting Overview
Explains how error/warning codes appear on the LCD and K-monitor for electric system issues.
Error/Warning Code Display Interpretation
Describes how to interpret error/warning codes displayed on the tractor's LCD.
Troubleshooting - Error/Warning Code Table
Electric Control Unit Name Meanings
Provides a table defining the abbreviations for electric control units.
Error/Warning Code Reference Table
Lists common error/warning codes, their type of trouble, and recommended actions.
Troubleshooting - Error/Warning Code Reference
Error/Warning Code Reference List (Part 2)
Continues the list of error/warning codes, types of trouble, and actions.
Tractor Options and Compatibility
Available Tractor Options
Lists available optional parts for transmission, cabin, hitch, and other systems.
Appendices - Maximum Masses
Maximum Permissible Load of Tires
Provides data on maximum permissible tire loads, dimensions, and inflation pressures.
Appendices - Index
Manual Index
An alphabetical index of topics covered in the manual with corresponding page numbers.
Need help?
Do you have a question about the M7151 and is the answer not in the manual?
Questions and answers