Operating Instructions; Temperature Setting - Sanyo MPR-414F - Commercial Solutions Refrigerator Instruction Manual

OPERATING INSTRUCTIONS

Temperature setting

Table 1 shows the basic operation method. Perform key operation in the sequence indicated in the table.
The example in the table is based on the assumption that the refrigerator temperature is 4
freezer temperature is -25
Note: The unit is set at the factory so that the refrigerator temperature is 5
o
temperature is -20 C.
Table 1 Basic operation procedure (Example of setting: refrigerator; 4
Operation
Connect to the power source and turn
1
on the power switch.
Select refrigerator (REF.)by
2
pressing display select key.
3 Press SET key.
Set to 004 by using digit shift key
4
and numerical value shift key.
5 Press SET key.
Select freezer (FREEZ.) by
6 pressing
display select key.
7 Press SET key.
Set to -25 by using digit shift key
8
and numerical value shift key.
9 Press SET key.
Note:
If no key has been pressed for about 90 seconds in the temperature set mode, the display mode returns
automatically to the temperature display mode.
changed.
The effective temperature setting for refrigerator ranges between 2 and 14 .
The stored items can be frozen partially when the set temperature of freezer is equal to or lower than 3 .
The freezer temperature can be set in the range between -15 and -35 . Remember that the guaranteed
temperature with no load at an ambient temperature of 30
13
o
C.
Key operated
-----
REF.
FREEZ.
SET
SET
REF.
FREEZ.
SET
SET
o
C, freezer; -25
Indication after operation
The current refrigerator or freezer
temperature is displayed.
The refrigerator indicator lights and
the current refrigerator temperature
is displayed.
The current set temperature is
displayed and the second digit of
the temperature display flashes.
Pressing the key leads the flash of
the first digit.
Pressing the key shifts up the figure
of the current digit.
The value is stored in memory and
the current refrigerator temperature
is displayed.
The freezer indicator lights
and the current freezer
temperature is displayed.
The current set temperature is
displayed and the second digit of
the temperature display flashes.
Pressing the key leads the flash of
the first digit.
Pressing the key shifts up the figure
of the current digit.
The value is stored in memory and
the current refrigerator temperature
is displayed.
In this case, the chamber temperature setting is not
is -30 .
45
o
C and the
o
C and the freezer
o
C)